Pages: [1]   Go Down

AuthorTopic: Superwinch service guide  (Read 2274 times)

0 Members and 1 Guest are viewing this topic.

Offline diggerdog36

  • Posts: 487
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • I fixed my CD auto changer!!!!
  • Referrals: 0
Superwinch service guide
« on: February 20, 2009, 22:25:28 »
Where can I get one, Im after servicing my EPi9.5 but want a guide on how to do it, I need to replace the solenoids too!
Im after a haynes style step by step guide to removing the motor/brake/gearbox etc.

Cheers peeps
Logged
2000 W Discovery Td5 ES

2" lift, Superwinch Epi9.5,  Mantec Snorkel, General Grabber AT2

Avoid employing unlucky people......simply bin half the applications!!!

Offline paul_humphreys

  • Posts: 2181
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Superwinch service guide
« Reply #1 on: February 20, 2009, 22:33:32 »
The last time I wanted one for a Superwinch, I sent them an email asking and they emailed one back. But it was for an X9.

Paul
Logged
LC 80 series 1993. 285/75/16s Cooper STTs, OME 850s on the front with 25mm packer, 868s on the rear. 4.88 diffs. Winch bumper with 12000lb winch. Factory lockers. HD rear bumper with wheel carrier and winch mount.

http://www.crag-uk.org

Offline diggerdog36

  • Posts: 487
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • I fixed my CD auto changer!!!!
  • Referrals: 0
Re: Superwinch service guide
« Reply #2 on: February 20, 2009, 22:38:13 »
 :shock:
OK, Ill give that a shot!

Cheers boss
Logged
2000 W Discovery Td5 ES

2" lift, Superwinch Epi9.5,  Mantec Snorkel, General Grabber AT2

Avoid employing unlucky people......simply bin half the applications!!!

Offline V8MoneyPit

  • Moderator
  • ***
  • Posts: 5077
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Superwinch service guide
« Reply #3 on: February 21, 2009, 10:20:05 »
It's dead easy. The only bit that you might consider not dismantling is the brake assembly on the end. Leave the circlips in place. It's the only part that needs 'setting up' afterwards, but even then, it's just a matter of preloading the spring by half a turn or so.

I've recently stripped and rebuilt my EP9. I replaced the drum bearings because they were shot. I also took the opportunity to seal the joints as I reasembled it.
Logged
Rgds
Steve

"Reality is wrong. Dreams are for real."

Land Rover build:
www.daisythediesel.com

Photos (my other passion and weakness):
http://www.flickr.com/photos/v8moneypit/

Offline diggerdog36

  • Posts: 487
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • I fixed my CD auto changer!!!!
  • Referrals: 0
Re: Superwinch service guide
« Reply #4 on: February 21, 2009, 21:18:05 »
Stumped at the first hurdle, how do I get the bridge cover off???  I took out the 4x 4mm Allen head bolts on the sides, but the thing wont come off, I cant see anything else holding it on.
Its an EPi9.5 by the way!!
Logged
2000 W Discovery Td5 ES

2" lift, Superwinch Epi9.5,  Mantec Snorkel, General Grabber AT2

Avoid employing unlucky people......simply bin half the applications!!!

Offline paul_humphreys

  • Posts: 2181
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Superwinch service guide
« Reply #5 on: February 21, 2009, 22:24:38 »
Logged
LC 80 series 1993. 285/75/16s Cooper STTs, OME 850s on the front with 25mm packer, 868s on the rear. 4.88 diffs. Winch bumper with 12000lb winch. Factory lockers. HD rear bumper with wheel carrier and winch mount.

http://www.crag-uk.org

Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal