Pages: [1]   Go Down

AuthorTopic: Bottom Pulley on a 200TDi  (Read 1156 times)

0 Members and 2 Guests are viewing this topic.

Offline J.D.

  • Posts: 1002
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • ...Pure as Belfast snow...
  • Referrals: 0
Bottom Pulley on a 200TDi
« on: March 04, 2009, 09:14:08 »
I need to get the bottom pulley off ym 200TDi engine to rebuild it and it is refusing to budge. So far  have:

bent two pullers,
nearly cracked the timing belt cover,
give it the good news with large hammers,

and it still refuses to budge. Its the first one I have ever not had come off, I know it is welded on or anything as I was the last one to put it on.

Any ideas greatly appreciated.
Logged
J.D.
- - - -
'ASBO' - Blue Land Rover Recovery Discovery 200TDiS - LR GRAVEYARD OCCUPANT (RIP).
'Green Giant' - Scammel Crusader - WEEKEND WORK!
'Helga' - 2.0T Volvo V40 - BORING!
'Pheonix' - 1995 3.9 V8 Discovery soon to be converted to TDi. - FINISHED!

www.hampshire4x4response.co.uk
www.berkshire4x4response.co.uk

Offline wizard

  • Posts: 1095
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Cardiff. In the land of our fathers, so i am told
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #1 on: March 04, 2009, 13:05:40 »
Hi
Do you have access to a gas axe.
Dont chop it off just warm the pully up a bit. Dont overdo it and heat up the crank though.
Do this with a set of pullers in place.

wizard  :twisted:
Logged

Offline Saffy

  • Posts: 3127
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
    • The Bell Inn, Imber.
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #2 on: March 04, 2009, 14:32:03 »
use the proper puller?
Logged
.swonk eno oN .esoht dna eseht ,siht dna taht ,wollof ot selur emos teg eW

Offline J.D.

  • Posts: 1002
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • ...Pure as Belfast snow...
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #3 on: March 04, 2009, 16:13:09 »
Cheers for the advice guys. The story so far is in the thread in this section called the Birth of Pheonix. Still haven't got the damn the off!
Logged
J.D.
- - - -
'ASBO' - Blue Land Rover Recovery Discovery 200TDiS - LR GRAVEYARD OCCUPANT (RIP).
'Green Giant' - Scammel Crusader - WEEKEND WORK!
'Helga' - 2.0T Volvo V40 - BORING!
'Pheonix' - 1995 3.9 V8 Discovery soon to be converted to TDi. - FINISHED!

www.hampshire4x4response.co.uk
www.berkshire4x4response.co.uk

Offline eugene

  • Posts: 815
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #4 on: March 04, 2009, 18:08:58 »
i had one like that i took bolt out started her up and moved steering left to right it made it lose by its self but thats nat the best way but it worked that is if engine is still in the truck  :D
Logged
sj410 wifes offroader
1992 gold 5 door disco winch and bumper spots rooflights .2inch lift. khuno kl 71 265.75.16.rebel steering guard. snorkel
 freelander wifes car
www.norfolk4x4response.org.uk  www.brecklandlrc.co.uk/

Offline lee celtic

  • Regional Rep
  • *
  • Posts: 2680
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #5 on: March 04, 2009, 19:53:37 »
Mine fell off when the bolt went walkies  :lol: gave me a reason to do the belt...
Logged
so many hills , so little time ....
discovery TD5
work in progress...lol

Offline trecfive

  • Posts: 457
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • If it fit's the hook it'll pull it.
    • Nuneaton
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #6 on: March 04, 2009, 21:39:39 »
Quote from: Saffy on March 04, 2009, 14:32:03
use the proper puller?

The four bolts in the pulley are for the correct puller to attach too, use the right one and it will work, us a piece of Chinese junk ----- well you know the answer to that.

Connect a suitable puller, tighten it up fairly tight and hit the puller on the centre bolt, if that don't shift it tighten up some more and add some gentle heat with the gas axe, BUT NOT ON THE CRANK and keep tightening the centre bolt.
Logged
1. Range Rover Classic 300tdi SE Auto Softdash
2. Range Rover Classic 300tdi SE Auto Softdash, apparently very rare.

Offline Les Henson

  • Posts: 369
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Is it supposed to do that?
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #7 on: March 05, 2009, 06:03:56 »
Make your own puller (bole holes are 75mm centre to centre. Tighten them, whack the centre, tighten again, etc, etc. A bit of heat is ok, but don't melt the damper - it doesn't matter about the timing cover seal as it should be replaced anyway.




Les.
Logged

Offline lambert

  • Moderator
  • ***
  • Posts: 2137
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • and then as if by magic
    • harrogate
  • Referrals: 0
Re: Bottom Pulley on a 200TDi
« Reply #8 on: March 05, 2009, 07:21:20 »
do be carefull useing heat with a puller as if there is loads of tension in it it will come away quite vigorously and that may well hurt either you or your radiator quite badly.
Logged
Lambert Coverdale.

As slow as possible, as fast as necessary.

Two and a half litres of turbocharged diesel goodness.
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal