AuthorTopic: Starting Problem  (Read 853 times)

0 Members and 2 Guests are viewing this topic.

Offline colheath

  • Posts: 28
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Starting Problem
« on: April 07, 2009, 16:23:52 »
Hi,

I have a 3.9 V8i Disco 1, we were out today just to blow a few cobwebs off it.  After about 10 minutes of driving we stopped at traffic lights, a few moments later the engine cut out.  My first thought was that it had changed over to gas too soon and turned the key to start it.  Nothing happened, no noise, no lights.  So I stuck on the hazard lights apologised to the growing line of traffic behind and tried again 8 or 9 times and nothing.  Then it turned over started briefly and cut out again.  Once again turning the key produced no effects for a few times, then it started and for the rest of the day has been behaving perfectly.  It's as if the immobiliser was cutting in.

Anyone have an idea could have caused this?  And is it easy to fix?

Cheers,
Colin.

Offline Shabba277

  • Posts: 68
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Starting Problem
« Reply #1 on: April 07, 2009, 17:39:50 »
sounds like your alarm spider, try a forum search or a google search you will find loads of info on this common problem.
http://forums.lr4x4.com/index.php?showtopic=86
Good luck.
Ady

Offline colheath

  • Posts: 28
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Starting Problem
« Reply #2 on: April 07, 2009, 18:16:13 »
cheers Ady.  Am not sure if it is that as mine's a '94 model although the symptoms sound right, and looks like a right [!Expletive Deleted!] to fix too! 

Offline Bluestrobe

  • Posts: 34
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Starting Problem
« Reply #3 on: April 07, 2009, 20:40:14 »
Had similar problem with my Rangie, it turned out to be the inertia switch for accident cut out, fit new switch or bypass it for fault diagnosis.
Non Arte Sect Marte

Offline muddyjames

  • Posts: 3867
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Starting Problem
« Reply #4 on: April 07, 2009, 20:49:57 »
you dont have a damp or dodgy dizzy do you?
Rover 620i 223,000 miles on the clock :)
1995 300tdi auto ES Disco. Big Green Giant

Most expensive item for a Disco is????? a round piece of paper stuck on the windscreen!

Offline colheath

  • Posts: 28
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Starting Problem
« Reply #5 on: April 08, 2009, 15:17:54 »
honestly I've no idea Jimmy.  It's been good as gold again today.  Am using it for towing the van to Devon for Easter weekend so hope it behaves itself!   

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Starting Problem
« Reply #6 on: April 08, 2009, 16:31:22 »
Might be an idea to get it sorted - last place you want it to cut out is while towing a caravan at 60mph on the motorway...

If it is the alarm spider then it's not too bad a job. You just need to work methodically and keep track of all the screws. Mine took about half an hour to do.

You can apparently resolder the dry joints in the spider unit, but knowing my luck if I did that then another couple of joints would go bad as soon as I'd finished reassembling the dashboard!  :lol:
1996 Discovery 300TDI. She's got it where it counts...

Offline muddyjames

  • Posts: 3867
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Starting Problem
« Reply #7 on: April 09, 2009, 17:42:49 »
and I would have thought if an auto box looses engine power at 60mph it wont do it any favours. Just my thought. And dont slam it into P if it does!!!
Rover 620i 223,000 miles on the clock :)
1995 300tdi auto ES Disco. Big Green Giant

Most expensive item for a Disco is????? a round piece of paper stuck on the windscreen!

Offline Mash

  • Posts: 332
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Lincoln
  • Referrals: 0
Re: Starting Problem
« Reply #8 on: April 09, 2009, 22:51:50 »
Nothing happened, no noise, no lights. 

Do you mean when you turned the key to the on position there was no ignition lights ? If so then check your battery terminals are tight and the earths are ok
Hit it till it breaks then hit it some more !

"Jingle" 200Tdi 110 - Which way to the mud ??

Offline colheath

  • Posts: 28
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Starting Problem
« Reply #9 on: April 10, 2009, 07:00:54 »
Nothing happened, no noise, no lights. 

Do you mean when you turned the key to the on position there was no ignition lights ? If so then check your battery terminals are tight and the earths are ok

no, meant there were no lights on the dash.

I've ran it every day since and it's been fine, starting first time.  Thanks for the advice fellas I'll report back with any news.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal