AuthorTopic: discovery central locking not working  (Read 2038 times)

0 Members and 1 Guest are viewing this topic.

Offline Rangierover

  • Posts: 18
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • my disco 300tdi 3'' lift
  • Referrals: 0
discovery central locking not working
« on: April 22, 2009, 11:27:53 »
as above really, i just cant get the central locking to work on my disco :angry: It is a 200tdi 5 door and none of the locks work at all

any ideas??

Cheers

Offline BigA

  • Posts: 597
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: discovery central locking not working
« Reply #1 on: April 22, 2009, 11:54:06 »
working from key, fob or both?

I had an intermittent problem on my 300, turned out to be a dodgy wire on the locking actuator in the drivers door. I believe this is the master unit, and if not working then none of them work. I got a replacement cheap enough on eblag, and all has been OK since?

Andy
1978 Series III 88"


Offline doda456

  • Posts: 104
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: discovery central locking not working
« Reply #2 on: April 22, 2009, 12:41:18 »
This may seem obvious but have you checked the fusebox, located under the steering column?

When i had a sticky actuator it blew the fuse and stopped all the doors locking/unlocking

Ive now fixed the problem by removing the fuse and the doors stay exactly how i left them be locked or unlocked

Dan

Offline Rangierover

  • Posts: 18
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • my disco 300tdi 3'' lift
  • Referrals: 0
Re: discovery central locking not working
« Reply #3 on: April 22, 2009, 13:49:43 »
working from key, fob or both?

from the key..dont have a fob

ive got another disco at home that imm using off the road so i'll take the actuator off that one an try it.




and yea i checked the fude box and the fusse is fine.

Offline BigA

  • Posts: 597
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: discovery central locking not working
« Reply #4 on: April 22, 2009, 14:38:11 »
from what i remember, its a bit of a pain to fit, you need to be able to bend you hands in places that they wont, otherwise just a couple of screws. But i would wait for any other suggestions before trying?

good luck either way
1978 Series III 88"


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal