AuthorTopic: Can I still open the boot door with a spare wheel mounted Simbar cycle rack?  (Read 3111 times)

0 Members and 1 Guest are viewing this topic.

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Can I still open the boot door with a spare wheel mounted Simbar cycle rack? Or do the cycle wheels swing round and clobber the OS lights?

Anybody got any pictures?
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline ChrisW70

  • Moderator
  • ***
  • Posts: 785
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
No pictures, but not had any issues with 4 bikes loaded although try not to open the door with the bikes on so as not to stuff the hinges up even further!
Chris W

West Midlands Region GLASS Rep
GLASS TRO Officer

Offline stageonesimmo

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Y'Arte Et Me Arte'ies
  • Referrals: 0
I have a halfrauds special that straps to the spare - I can open the door fine - but I always take the front wheel of my bike as its a full susser with a faily long wheelbase so needs to be shunted across to one side to get it to sit right and avoid daft levels of overhang.  I always mount it so the front is at the Off-side and with no wheel on it all is well, but I recall a time when I had 3 bikes on there for a trip to the Orkenys and I could still open the door with the wheels fitted as the rack was far enough out from the door to clear the wing/lamp units, even on full extension of the hinges - only thing was the lock took a chunk out of the buffer plate as it closed due to the hinges sinking with the weight.........

Cant say for certain with your make of rack though as I dont know how far out it sitts in relation to the spare, sorry............

Bri
Son, life has a habit of kicking you in the ass and i only have vague recollections of when it wasn't kickin mine!

Offline defuzz

  • Posts: 295
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
I was just trying to work out why my post hadn't shown uop in the sidelight thread, now I see I posted it here instead.

move along now, nothing to see here.....
« Last Edit: April 24, 2009, 15:59:59 by defuzz »
__________________________________________
1990 200TDi Discovery


Offline KingWolf

  • Posts: 883
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Spalding, Lincs
  • Referrals: 0
Door opens without any issues mate, see below for pictures I took especially for you this morning.... :lol: :lol: :lol:

Mark.






96' Discovery XS TDI with Muds, Lightbar, Snorkel, Guardian Tank Guard, Steering Guard, Wading Kit, Winch Bumper and Winch...!!!! Lift kit next..... :-)


Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Door opens without any issues mate, see below for pictures I took especially for you this morning.... :lol: :lol: :lol:

Mark.

Hi Mark,

Many, many thanks for the photos.  :clap: :clap:

One further question. I have 265's on 17" Predators - slightly more offset. If I push a plank against the spare tyre then measure from the inside (tyre side) of the plank to the outside of the spare wheel holder, I have a measurement of 120mm. How does that compare to standard width tyres (are yours standard?) and will I have enough clearance?
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline KingWolf

  • Posts: 883
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Spalding, Lincs
  • Referrals: 0
I'm a little confused as to where you'd like me to measure mate. I get the bit about the plank against the spare wheel but this is where I'm getting lost....sorry. I think you mean measure from the outside of the wheel, through the wheel to the carrier...???? but I could be wrong.... :lol: :lol: :lol:

If you've got larger wheels then I think you might struggle to even fit the carrier as the boss which fits behind the spare wheel won't stick out far enough through the wheel for you to attach the carrier too...!!!! I have standard 235/70/16 fitted, I'll take a picture tomorrow to show you what I mean.

Mark.
96' Discovery XS TDI with Muds, Lightbar, Snorkel, Guardian Tank Guard, Steering Guard, Wading Kit, Winch Bumper and Winch...!!!! Lift kit next..... :-)


Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
I'm a little confused as to where you'd like me to measure mate. I get the bit about the plank against the spare wheel but this is where I'm getting lost....sorry. I think you mean measure from the outside of the wheel, through the wheel to the carrier...???? but I could be wrong.... :lol: :lol: :lol:

You're exactly right - sorry for the confusion.

 :oops: :oops: :oops: :oops:
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline KingWolf

  • Posts: 883
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Spalding, Lincs
  • Referrals: 0
No worries mate. I'll have a measure up tomorrow and post my findings for you.

Mark.
96' Discovery XS TDI with Muds, Lightbar, Snorkel, Guardian Tank Guard, Steering Guard, Wading Kit, Winch Bumper and Winch...!!!! Lift kit next..... :-)


Offline KingWolf

  • Posts: 883
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Spalding, Lincs
  • Referrals: 0
OK - here's round 2 of photo's and measurements for you mate.

First off......with a plank of wood pressed against the spare wheel I measured through the centre of the Simbars boss (it's hollow and allowed me to get to the spare wheel carrier) and I get a measurement of 100mm.... this is with standard 235/70/16......see picture below......  :lol:




As I mentioned earlier the boss for the cycle carrier is designed to stick out through the spare wheel just far enough for you to be able to secure the rack to the boss with a padlock. See picture below.... :lol:



And this one....



This hole is 80mm from the wheel carrier, again see picture below.... :lol:



Once again I hope this helps mate. If you need anything else then just ask........

Mark.

« Last Edit: April 27, 2009, 18:19:01 by KingWolf »
96' Discovery XS TDI with Muds, Lightbar, Snorkel, Guardian Tank Guard, Steering Guard, Wading Kit, Winch Bumper and Winch...!!!! Lift kit next..... :-)


Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Your a real star - many, many thanks.

I've got 20mm less space than you but on the plus side, I can weld and my wheel centre seems much wider.



I'll post photos when I get it fitted.

Thanks again.
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline lcruiser100s

  • Posts: 66
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
what is the inner dimension of the square receiver, that is fitted in centre of wheel.
http://www.mud-club.com/galleries/lcruiser100s
imported 105 landcruiser from Aus. Built for Everything.

Offline KingWolf

  • Posts: 883
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Spalding, Lincs
  • Referrals: 0
Your more than welcome mate. I'm always glad to help....  :D

As for the inner dimension of the boss well that's 32mm

Next question please...???...lmao... :lol: :lol: :lol:

Mark.
96' Discovery XS TDI with Muds, Lightbar, Snorkel, Guardian Tank Guard, Steering Guard, Wading Kit, Winch Bumper and Winch...!!!! Lift kit next..... :-)


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal