AuthorTopic: Check engine light on??  (Read 1025 times)

0 Members and 1 Guest are viewing this topic.

Offline ben-dent

  • Posts: 352
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Check engine light on??
« on: July 04, 2009, 22:21:48 »
My mums disco has developed an intermittent fault, it brings the engine check light on when driving along,

only happens when engine is warm and done a long run, and when sat at about 2k RPM around 30 MPH and 55 MPH

the engine dosnt fail, Misfire or or anything out of the ordinary, all the levels are ok and i cant find any chaffed wires?

Please help, i dont want it to break down on her

its a 300 TDi, with electric pump and an electric sensor on the 4th injector

Thanks in advance
« Last Edit: July 05, 2009, 22:42:38 by Thrasher »
Ben Haynes

1984(B) Rangie Vouge V8) (DENT)
1986(D) Rangie Vouge CCV Trialer


Offline Rossko

  • Posts: 297
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Check engine light on??
« Reply #1 on: July 05, 2009, 11:31:29 »
With no other clues at all, you are going to have find a way to read out the fault code(s) to see what it is complaining about.

You'll have to work out which engine it has too.
GLASS

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Check engine light on??
« Reply #2 on: July 06, 2009, 11:39:23 »
You can buy a fault code reader from ebay for about £25. Just find out which protocol the car uses first, as there are OBD and OBD II that I know of and possibly others.

The readers are really easy to use, just plug it in and follow the instructions. You'll save a few quid over having a garage reset it.
1996 Discovery 300TDI. She's got it where it counts...

Offline ben-dent

  • Posts: 352
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Check engine light on??
« Reply #3 on: July 06, 2009, 17:37:10 »
You can buy a fault code reader from ebay for about £25. Just find out which protocol the car uses first, as there are OBD and OBD II that I know of and possibly others.

The readers are really easy to use, just plug it in and follow the instructions. You'll save a few quid over having a garage reset it.

i will stick it on the diagnostics kit at work, and see what fault it brings up

does it have a 16 pin dignostic plug, or another type of plug
« Last Edit: July 06, 2009, 17:38:48 by ben-dent »
Ben Haynes

1984(B) Rangie Vouge V8) (DENT)
1986(D) Rangie Vouge CCV Trialer


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal