AuthorTopic: 200 into n/a defender  (Read 1733 times)

0 Members and 1 Guest are viewing this topic.

Offline gnasha

  • Posts: 341
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Member No 1720
    • kettering
  • Referrals: 0
200 into n/a defender
« on: July 26, 2009, 18:26:24 »
i found a lot of write ups were its a 200 into a td but as yet none for a n/a is there a diff or is it the same ie use n/a gearbox then just plumb it all in got my disco for the engine and what ever i need of it just wondering what else i need to get


Click our banner above to visit our forum
200tdi Landrover 90 200tdi disco what's left of it lol
http://gnasha1.talk4fun.net/ http://www.gnasha1.co.uk/ http://www.elite4x4.co.uk/
http://www.ebay.co.uk/sch/gnasha/m.html?_trksid=p4340.l2562

Offline craig_midz

  • Posts: 397
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 200 into n/a defender
« Reply #1 on: July 27, 2009, 23:25:02 »
exactly the same u need the flywheel housing an engine mounts off the na to put on disco engine and then same old with exhuast but all wiring is the same oh an i used the fuel filter housing off disco as n/a fuel pipes screwed straight in2 it

Offline gnasha

  • Posts: 341
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Member No 1720
    • kettering
  • Referrals: 0
Re: 200 into n/a defender
« Reply #2 on: July 28, 2009, 14:55:27 »
thanks what about the oil cooler pipes as n/a dont have them also i thinking of using the power steering of the disco as i think its just a bolt off bolt on job for that unless someone says diff


Click our banner above to visit our forum
200tdi Landrover 90 200tdi disco what's left of it lol
http://gnasha1.talk4fun.net/ http://www.gnasha1.co.uk/ http://www.elite4x4.co.uk/
http://www.ebay.co.uk/sch/gnasha/m.html?_trksid=p4340.l2562

Offline craig_midz

  • Posts: 397
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 200 into n/a defender
« Reply #3 on: July 28, 2009, 19:51:12 »
what i did was get the disco oil cooler pipes lengthened by a mate who works for pirtek an u can use disco pas box an pipework u just have to get pipes lengthened again an if u using disco rad u have 2 lower the rad mounts 2

Offline Disco-andy

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 200 into n/a defender
« Reply #4 on: July 28, 2009, 21:13:45 »
Am i right in thinking you will need to change the drop arm to use the disco pas box?

Offline barmiebrumie

  • Posts: 1745
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Birmingham, M6 J7
  • Referrals: 0
Re: 200 into n/a defender
« Reply #5 on: July 28, 2009, 21:29:16 »
I am breaking a 200tdi with every thing you would need £350 if your interseted


John
John.

Offline craig_midz

  • Posts: 397
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 200 into n/a defender
« Reply #6 on: July 28, 2009, 22:18:23 »
yes mate take the drop arm off ya n/a manual box an it will go straight on2 the disco pas box

Offline gnasha

  • Posts: 341
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Member No 1720
    • kettering
  • Referrals: 0
Re: 200 into n/a defender
« Reply #7 on: July 29, 2009, 12:56:06 »
keep the info comeing the more i no the better thanks for the offer barmiebrumie but i allready have the disco thats in my pic that iam using as the donor motor


Click our banner above to visit our forum
200tdi Landrover 90 200tdi disco what's left of it lol
http://gnasha1.talk4fun.net/ http://www.gnasha1.co.uk/ http://www.elite4x4.co.uk/
http://www.ebay.co.uk/sch/gnasha/m.html?_trksid=p4340.l2562

Offline barmiebrumie

  • Posts: 1745
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Birmingham, M6 J7
  • Referrals: 0
Re: 200 into n/a defender
« Reply #8 on: July 29, 2009, 13:21:43 »
ok, I'm on the look out my self for a 90 so think maybe I should keep the Disco engine & bits as a donor as non 200tdi's seem to go for a lot less  ;)


John
John.

Offline craig_midz

  • Posts: 397
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 200 into n/a defender
« Reply #9 on: July 29, 2009, 14:34:15 »
when i did mine i cheated slightly an brought the steve parker exhuast an intercooler pipes but u can fit a 300 tdi turbo an then u can use a standard downpipe but i think u have 2 shorten it

Offline barmiebrumie

  • Posts: 1745
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Birmingham, M6 J7
  • Referrals: 0
Re: 200 into n/a defender
« Reply #10 on: July 29, 2009, 17:19:03 »
Can this also be done if the Defender is a 2.25 petrol ?,


Thanks in advaned

John
John.

Offline craig_midz

  • Posts: 397
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 200 into n/a defender
« Reply #11 on: July 29, 2009, 17:57:37 »
yes mate but i think there is a bit more involved with a petrol as i think u have to run a extra fuel line for the return


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal