AuthorTopic: TD5 cooling / Heating  (Read 696 times)

0 Members and 1 Guest are viewing this topic.

Offline fesuvious

  • Posts: 395
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • water water everywhere, oh sh*t, Iv stalled it
  • Referrals: 0
TD5 cooling / Heating
« on: September 11, 2009, 08:34:36 »
Righty, anyone got any ideas?

My TD5 wasn't warming up. I did put another post about this, anyway;

Last night removed the fan. Today on way to work the guage sat at 1/4 for first 3 miles then went up to halfway in one go (pretty much).

Im figuring the fan was overcooling as previously she wouldn't warm up, the guage barely moved.

Now! I thought that the reason my heater blowed cool was because she didn't warm up. However this morn the blowers were still only tepid.

As I type this I am wondering if an air lock could be the cause but are there any common issues relating to the TD5 etc?

Also, anyone know best place to get a thermostat for a TD5? Unipart supplied me yesterday (despite having the reg) with a normal type thermostat and I saw last night its some sort of funky big plastic unit.

Thanks
Recommended wading depth 500 inches, no wait, im sure that was milimetres. And let me get this right. The breakover angle is 80 degrees....??

Ahh, f**k it, Il give it a go anyway

Offline Hightower

  • Moderator
  • ***
  • Posts: 1112
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: TD5 cooling / Heating
« Reply #1 on: September 11, 2009, 12:22:52 »
First thing I would check is the water level.  Mine started to do as you describe and the cause was loss of coolant which turned out to be a head gasket.

Hopefully your problem will just be an air lock.

I would get a thermostat from LR given the choice.
Simon
1998 Disco Series II Td5 - Not standard
1972 88" Series 3 - The project

Macmillan 4x4 UK Challenge
1st Overall - 2011, 2010, 2009, 2008, 2006, 2005
3rd Overall - 2007

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal