Topic: How do I replace my tail light? (Read 1154 times)

JumboBeef · « **on:** September 30, 2009, 08:21:43 »

How do I replace the tail light (in the rear bumper) on my 1996 Disco please?

ChrisW70 · « **Reply #1 on:** September 30, 2009, 08:48:51 »

The lamp holder is a twist-lock type, get underneath and unplug the cable off the back of the holder and twist. It can be a bit fiddly due to the brackets but it comes out eventually.

JumboBeef · « **Reply #2 on:** September 30, 2009, 10:38:32 »

Thanks!

muddyjames · « **Reply #3 on:** October 01, 2009, 05:15:44 »

it is inded fiddly and even trickier to line up to get back in so remember which way it came out! I have some spares somewhere if you get cross and break it!

JumboBeef · « **Reply #4 on:** October 02, 2009, 08:37:41 »

Ah yes, the connector and blub hold are broken, the bulb is OK. I need both new bits, do you have those please?

karlo · « **Reply #5 on:** October 02, 2009, 10:34:01 »

Bit of info, they are the same as the front indicator ones.

XBP100180 Bulb Holder - 21W - Sidelight and Indicators - Defender from MA939976/38a Range Rover/Discovery I Rear Bumper Lights from MA081992

£1.15 Ex VAT

£1.32 Inc VAT

http://www.beamends-lrspares.co.uk/BeamEnds/DiscoveryI/Electrical/index.html

JumboBeef · « **Reply #6 on:** October 03, 2009, 10:03:32 »

OK, thanks!

News:

AuthorTopic: How do I replace my tail light? (Read 1154 times)

JumboBeef

How do I replace my tail light?

ChrisW70

Re: How do I replace my tail light?

JumboBeef

Re: How do I replace my tail light?

muddyjames

Re: How do I replace my tail light?

JumboBeef

Re: How do I replace my tail light?

karlo

Re: How do I replace my tail light?

JumboBeef

Re: How do I replace my tail light?