AuthorTopic: D2 hand brake/fluid light flashing on/off  (Read 1069 times)

0 Members and 1 Guest are viewing this topic.

Offline SWEETY

  • Posts: 284
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
D2 hand brake/fluid light flashing on/off
« on: September 30, 2009, 19:25:14 »
Hi guys, i could do with a bit of help please. Just picked up my 1st LR a nice D2 V8 auto & on the way home noticed that the hand brake,brake fluid light keeps flashing on & off. I will even come on if the door is shut hard when parked up. Checked the brake fluid level & it's at the top :rolleyes: Only thing I can think of is a poss broken brake pad warning censor wire, anyone got any ideas.
Many thanks
Neil
I don't suffer insaity ! I enjoy it !!!

Disco 2 V8 powered

Offline Hightower

  • Moderator
  • ***
  • Posts: 1112
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: D2 hand brake/fluid light flashing on/off
« Reply #1 on: September 30, 2009, 20:13:40 »
Neil,

As far as I know there are no brake pad sensors on the D2.  I would start by looking at the switch on the handbrake itself.  The wire there may be loose and causing the intermittant flashing.
Simon
1998 Disco Series II Td5 - Not standard
1972 88" Series 3 - The project

Macmillan 4x4 UK Challenge
1st Overall - 2011, 2010, 2009, 2008, 2006, 2005
3rd Overall - 2007

Offline SWEETY

  • Posts: 284
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: D2 hand brake/fluid light flashing on/off
« Reply #2 on: September 30, 2009, 21:03:59 »
Thanks wasn't sure if they were fitted or not :oops: Ok how do I get to the hand brake switch, is it under the centre console arm rest bit sorry if it seems like a silly Q just having to find my way around things
I don't suffer insaity ! I enjoy it !!!

Disco 2 V8 powered

Offline Hightower

  • Moderator
  • ***
  • Posts: 1112
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: D2 hand brake/fluid light flashing on/off
« Reply #3 on: September 30, 2009, 23:57:48 »
Yeah, if you gently prise off the cover from around the window switches you can then remove the plate underneath.  You should be able to see the switch from there.

Good luck
Simon
1998 Disco Series II Td5 - Not standard
1972 88" Series 3 - The project

Macmillan 4x4 UK Challenge
1st Overall - 2011, 2010, 2009, 2008, 2006, 2005
3rd Overall - 2007

Offline SWEETY

  • Posts: 284
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: D2 hand brake/fluid light flashing on/off
« Reply #4 on: October 01, 2009, 13:11:32 »
Cheers :D managed to get at the switch & all seems fine as I had a good wiggle of the wire & plug & the light didn't come on, cleaned up the contacts on the brake fluid res as they were a bit corroded but ithe light still keeps coming on now & again :evil:
I don't suffer insaity ! I enjoy it !!!

Disco 2 V8 powered

Offline J.D.

  • Posts: 1002
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • ...Pure as Belfast snow...
  • Referrals: 0
Re: D2 hand brake/fluid light flashing on/off
« Reply #5 on: October 02, 2009, 13:47:52 »
Where the wires enter the top of the master cylinder, the can corrode, check the are not touching.
J.D.
- - - -
'ASBO' - Blue Land Rover Recovery Discovery 200TDiS - LR GRAVEYARD OCCUPANT (RIP).
'Green Giant' - Scammel Crusader - WEEKEND WORK!
'Helga' - 2.0T Volvo V40 - BORING!
'Pheonix' - 1995 3.9 V8 Discovery soon to be converted to TDi. - FINISHED!

www.hampshire4x4response.co.uk
www.berkshire4x4response.co.uk

Offline SWEETY

  • Posts: 284
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: D2 hand brake/fluid light flashing on/off
« Reply #6 on: October 02, 2009, 21:25:16 »
Managed to track it down to the brake fluid level sensor as when it's unplugged no flashing light :D
I don't suffer insaity ! I enjoy it !!!

Disco 2 V8 powered

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal