Pages: [1]   Go Down

AuthorTopic: refuses to start when hot  (Read 1820 times)

0 Members and 1 Guest are viewing this topic.

Offline swc

  • Posts: 6
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
refuses to start when hot
« on: October 15, 2009, 16:59:23 »
Hello, S111, 2.25 petrol with zenith carb starts well from cold but refuses to start after even 10min run.Turns over v well but will not catch. I searched the forum and came up with fuel line too hot but Ive had it for yrs and its not done this before. Any ideas fratefully received simon
Logged

Offline Lucy1978

  • Posts: 516
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: refuses to start when hot
« Reply #1 on: October 15, 2009, 20:40:38 »
Is the coil ok?
Logged

Offline Pete

  • Posts: 248
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Re: refuses to start when hot
« Reply #2 on: October 16, 2009, 22:45:51 »
 Had a similar problem with my series. Changed the coil, and only a slight improvement, it turned out to be the dizzy starting to break up inside. New dizzy and problem solved.
 Pete
Logged

Offline swc

  • Posts: 6
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: refuses to start when hot
« Reply #3 on: October 19, 2009, 15:37:44 »
thanks Ive ordered a new coil and will Ix dizzy further
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal