AuthorTopic: 300 disco axle on a 1989 defender  (Read 1116 times)

0 Members and 1 Guest are viewing this topic.

Offline Bish

  • Posts: 21
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
300 disco axle on a 1989 defender
« on: November 01, 2009, 16:56:22 »
I've blown the front diff (and a hub at the same time :doh:) on my 1989 defender, its coil sprung and has 10 spline diffs. I have a Disco 24 spline front axle. are the ratios the same on the 24 and 10? I'm gonna change the rear axle as well for a 24 spline but can't do the rear for a few weeks.

Offline barmiebrumie

  • Posts: 1745
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Birmingham, M6 J7
  • Referrals: 0
Re: 300 disco axle on a 1989 defender
« Reply #1 on: November 01, 2009, 18:07:29 »
Yes they are, have put a 24 into the front with a 10 on the rear before with no issues

hope that helps


John
John.

Offline Bish

  • Posts: 21
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 300 disco axle on a 1989 defender
« Reply #2 on: November 01, 2009, 18:21:01 »
Thanks for your help john. Axle change tomorrow then!

Offline barmiebrumie

  • Posts: 1745
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Birmingham, M6 J7
  • Referrals: 0
Re: 300 disco axle on a 1989 defender
« Reply #3 on: November 01, 2009, 18:33:06 »
Thanks for your help john. Axle change tomorrow then!

Good luck with it, will be diong mine over the Xmas/new year, along with engine change  :roll:


John
John.

Offline Bish

  • Posts: 21
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: 300 disco axle on a 1989 defender
« Reply #4 on: November 01, 2009, 20:13:26 »
Not long changed my engine as the old one put a big end through the side of the block

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal