AuthorTopic: range rover rear calipers  (Read 1522 times)

0 Members and 1 Guest are viewing this topic.

Offline JIMBOBLY

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
range rover rear calipers
« on: November 14, 2009, 18:57:12 »
im goin to replace both rear calipers on my rangie,its a L reg 93,what years of other landrovers will have the same units,i know discoverys have the same,but what years,because lookin at new ones,there is a difference in up to 93,and 94 onwards to the last classics,will both units fit?

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: range rover rear calipers
« Reply #1 on: November 15, 2009, 00:57:20 »
I'm not aware there were any differences at all, AFAIK the same pads fit and the bolts ae the same, so unless the pistons are different I don't know.

Watching with interest now :-k
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline JIMBOBLY

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: range rover rear calipers
« Reply #2 on: November 15, 2009, 13:51:56 »
well,first of all,thanks for replying,when i went to order off paddocks,there was a choice of calipers,it was 86 to 93,and t5hen 93 on wards,but mine is a 93,so pretty obvious,but just slightly worried that i would send for these,and they come wrong,but like you said,the bolts and pads are the same,so in theory,if i get a pair,i should be ok,cheers jim :D

Offline Bowie

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: range rover rear calipers
« Reply #3 on: November 16, 2009, 16:13:53 »
Late rangie axles have different caliper bolt hole sizes to Defender/90/110 axles, so you can't actually swap the calipers across to an older axle, or the other way without reaming the mounting holes slightly -I think this is the only difference mind you.
1980 SIII Lightweight 2.25 Petrol - completely standard.
1991 Range Rover Vogue SE 3.9 V8 - now on LPG (sorted!), 2" lift, mud tyres, and more to come...

Offline JIMBOBLY

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: range rover rear calipers
« Reply #4 on: November 16, 2009, 21:01:08 »
Late rangie axles have different caliper bolt hole sizes to Defender/90/110 axles, so you can't actually swap the calipers across to an older axle, or the other way without reaming the mounting holes slightly -I think this is the only difference mind you.
i think you're mate,because my mate eugen had the same problem with his disco,with the front original calipers,when he fitted a later axle,just reemed them out slighly.

Offline squaddie_fox

  • Posts: 386
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: range rover rear calipers
« Reply #5 on: November 18, 2009, 18:51:10 »
as far as i am concerned any modification to ANY brake components from the manufactured standard should not be done.

even if it is 'just' reaming out the holes.

235/85 special tracks, 3.9 V8, HD bumpers, +3 inch lift, +5 shocks f&r, 12000lbs champion winch, heavy duty steering bars, CB and a snorkel....

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal