Pages: [1]   Go Down

AuthorTopic: injector loom  (Read 1407 times)

0 Members and 1 Guest are viewing this topic.

Offline bombx3

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
injector loom
« on: November 15, 2009, 08:17:48 »
hi fittting a new loom on my injectors ,the copper teminals have been getting oily i have cleaned them with brake cleaner but they are black still looks like a thin burnt oil do i atempt to clean this off or will it be ok to leave
Cheers
Logged
_______________________________________
 defender 200 tdi. 59,000m ,winch .spots,front rollcage,rear internalcage,snorkel,undersealed,polybushed,tweaked motor,roof tent ,muds ,noise reducers,stainless exhaust,3"lift+4 shocks,chequered plating,12 change cd ,cb,sound proof kit,sunroof,landrover carpet,wading kit.hilift jack,rock sliders jackable,axle breather kit,folding forward facing rear,roof rack to carry roof tent, seat,electric seat warmer.tilt meter,full stainlees exhaust,fire exstingsher thatcham alarm ,immobolizer , fsh and only used on sundays once a month,now 38" boggers,wide ange props,4pin diff ,ashcroft shafts,qt steering bar ,winch

Offline bombx3

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injector loom
« Reply #1 on: November 15, 2009, 09:51:29 »
well cleaned them no better but the big plug was a pig to get on could get it to click.has any one had a faulty britpart loom?
Logged
_______________________________________
 defender 200 tdi. 59,000m ,winch .spots,front rollcage,rear internalcage,snorkel,undersealed,polybushed,tweaked motor,roof tent ,muds ,noise reducers,stainless exhaust,3"lift+4 shocks,chequered plating,12 change cd ,cb,sound proof kit,sunroof,landrover carpet,wading kit.hilift jack,rock sliders jackable,axle breather kit,folding forward facing rear,roof rack to carry roof tent, seat,electric seat warmer.tilt meter,full stainlees exhaust,fire exstingsher thatcham alarm ,immobolizer , fsh and only used on sundays once a month,now 38" boggers,wide ange props,4pin diff ,ashcroft shafts,qt steering bar ,winch

Offline extreme90

  • Regional Rep
  • *
  • Posts: 3219
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • say no to orange extreme bits !!
  • Referrals: 0
Re: injector loom
« Reply #2 on: November 15, 2009, 23:20:46 »
i fitted a *hitpart loom to a motor, it came back not long after with a awful missfire on start up, whipped the loom boack off and all injector plugs were full of oil  :roll: :roll:
so ive always used genuine since and not had a problem
dan
Logged
Dan Thomas,                  Matt Price
Team Relentless " No half measures "
Bobtailed Auto Td5 90 comp truck........... Got more tricks than a magician !!

http://www.Devon 4x4.co.uk >> for all your truck needs and more !!
http://www.Gigglepin4x4.net >> For when the going gets tuff, and one motor just isnt good enough !!!
http://www.gwynlewis4x4.co.uk >> the guy everyone forgets, but he doesnt forget your custom.

Offline bombx3

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injector loom
« Reply #3 on: November 16, 2009, 00:16:12 »
cheers Dan did you ever have trouble fitting the main plug to the loom because mine is a pig and not clipping in
Logged
_______________________________________
 defender 200 tdi. 59,000m ,winch .spots,front rollcage,rear internalcage,snorkel,undersealed,polybushed,tweaked motor,roof tent ,muds ,noise reducers,stainless exhaust,3"lift+4 shocks,chequered plating,12 change cd ,cb,sound proof kit,sunroof,landrover carpet,wading kit.hilift jack,rock sliders jackable,axle breather kit,folding forward facing rear,roof rack to carry roof tent, seat,electric seat warmer.tilt meter,full stainlees exhaust,fire exstingsher thatcham alarm ,immobolizer , fsh and only used on sundays once a month,now 38" boggers,wide ange props,4pin diff ,ashcroft shafts,qt steering bar ,winch

Offline extreme90

  • Regional Rep
  • *
  • Posts: 3219
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • say no to orange extreme bits !!
  • Referrals: 0
Re: injector loom
« Reply #4 on: November 16, 2009, 17:48:30 »
didnt have a problem, make sure none of the pins are bent
Logged
Dan Thomas,                  Matt Price
Team Relentless " No half measures "
Bobtailed Auto Td5 90 comp truck........... Got more tricks than a magician !!

http://www.Devon 4x4.co.uk >> for all your truck needs and more !!
http://www.Gigglepin4x4.net >> For when the going gets tuff, and one motor just isnt good enough !!!
http://www.gwynlewis4x4.co.uk >> the guy everyone forgets, but he doesnt forget your custom.

Offline bombx3

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injector loom
« Reply #5 on: November 16, 2009, 21:09:42 »
would a nonocom detect a fault in the loom,,i had great trouble compressing the loom plug into the injector loom plug,there is a blue compression gasket made out off some silcone stuff i am a brickie and it took all of my anger to push it in
Logged
_______________________________________
 defender 200 tdi. 59,000m ,winch .spots,front rollcage,rear internalcage,snorkel,undersealed,polybushed,tweaked motor,roof tent ,muds ,noise reducers,stainless exhaust,3"lift+4 shocks,chequered plating,12 change cd ,cb,sound proof kit,sunroof,landrover carpet,wading kit.hilift jack,rock sliders jackable,axle breather kit,folding forward facing rear,roof rack to carry roof tent, seat,electric seat warmer.tilt meter,full stainlees exhaust,fire exstingsher thatcham alarm ,immobolizer , fsh and only used on sundays once a month,now 38" boggers,wide ange props,4pin diff ,ashcroft shafts,qt steering bar ,winch

Offline extreme90

  • Regional Rep
  • *
  • Posts: 3219
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • say no to orange extreme bits !!
  • Referrals: 0
Re: injector loom
« Reply #6 on: November 17, 2009, 16:39:04 »
on the inside or out
on the outside there are two blue o-rings to seal the plug against the cam ladder/head
then on the inside of the plug ( loom side) there should be another blue webbed sealing ring.
i cant see why you should have a problem fitting the two plugs together unless the sealing ring has moved, the injestor harness male end has been squished so its egged the plug or the pins are bent.

nanocom will bring up either a logged or current open circuit on the relivant injectors, if not all of them.

does it run ok ?
Logged
Dan Thomas,                  Matt Price
Team Relentless " No half measures "
Bobtailed Auto Td5 90 comp truck........... Got more tricks than a magician !!

http://www.Devon 4x4.co.uk >> for all your truck needs and more !!
http://www.Gigglepin4x4.net >> For when the going gets tuff, and one motor just isnt good enough !!!
http://www.gwynlewis4x4.co.uk >> the guy everyone forgets, but he doesnt forget your custom.

Offline bombx3

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injector loom
« Reply #7 on: November 17, 2009, 17:20:15 »
Below turbo kick it is poor ,then now and again its brill ,,the main loom plug Female has a like blue silcone ring .the pins arnt bent ,when i fitted the injector loom first time the plug fitted ok,,makes the mind boggle
Logged
_______________________________________
 defender 200 tdi. 59,000m ,winch .spots,front rollcage,rear internalcage,snorkel,undersealed,polybushed,tweaked motor,roof tent ,muds ,noise reducers,stainless exhaust,3"lift+4 shocks,chequered plating,12 change cd ,cb,sound proof kit,sunroof,landrover carpet,wading kit.hilift jack,rock sliders jackable,axle breather kit,folding forward facing rear,roof rack to carry roof tent, seat,electric seat warmer.tilt meter,full stainlees exhaust,fire exstingsher thatcham alarm ,immobolizer , fsh and only used on sundays once a month,now 38" boggers,wide ange props,4pin diff ,ashcroft shafts,qt steering bar ,winch
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal