recovery points on an original bumper

[frosty]

  hi,
       Im looking at fitting some recovery points on the front of my 90 and noticed theres several types that bolt straight on to the original bumper and have a spreader plate behind it. Has anyone tried these type with any success? The last thing i want is to find they pull straight through when im stuck in the middle of now where!

[mass199]

I would'nt use one, i've seen standard Defender bumpers tear when these have been used. You would be better off with a jate ring and attach a strap when off roading or laning then you won't have to search for the jate ring when your up to your head lights in mud etc.

[redhand]

I would'nt use one, i've seen standard Defender bumpers tear when these have been used. You would be better off with a jate ring and attach a strap when off roading or laning then you won't have to search for the jate ring when your up to your head lights in mud etc.

I'll 2nd that, Or get an HD Front bumper or steering guard with recovery points built in.

[william127]

ive got an army center pin bumper(thats what i call it), its reinforced along the middle and has a big tow pin. used it to pull myself out  loads and pulled  a 7-1/5tonner yesteday. i paid £25 for it at eastnor show, ground it down, red oxided it and sprayed it black, really pleased with it

[frosty]

  cheers for that..
         
          i had a sneaky feeling that would be the advice.. ill have a look around at steering guards then.. or military spec bumpers...or hd bumpers..or anything else shiny to bolt on the front! lol

 

[tack43]

ive got an army center pin bumper(thats what i call it), its reinforced along the middle and has a big tow pin. used it to pull myself out  loads and pulled  a 7-1/5tonner yesteday. i paid £25 for it at eastnor show, ground it down, red oxided it and sprayed it black, really pleased with it

Definately wouldn't use this sort of bumper for any recovery apart from road towing. Some of my guys tried it once with a bellied out Wolf. Ended up with a V shaped bumper. They all found out why jate rings are fitted front and rear to military spec Land Rovers!

Rich

[frosty]

  yeah..now you come to mention it... i seem to remember never recovering anything by the nato hitch (of the bigger vehicles) in the front bumper while i was in the army..we always used the spring hangers..and i guess its the same for landys...i think ill just avoid getting stuck..itll be easier in the long run!

[redhand]

ive got an army center pin bumper(thats what i call it), its reinforced along the middle and has a big tow pin. used it to pull myself out  loads and pulled  a 7-1/5tonner yesteday. i paid £25 for it at eastnor show, ground it down, red oxided it and sprayed it black, really pleased with it

Definately wouldn't use this sort of bumper for any recovery apart from road towing. Some of my guys tried it once with a bellied out Wolf. Ended up with a V shaped bumper. They all found out why jate rings are fitted front and rear to military spec Land Rovers!

Rich

Not for recovery funnily enough. JATE = Joint Air Transportation Executive. and JATE rings are provided for Air transportation only. Though I've never heard of a forged JATE ring snapping. whilst been used for recovery. And I've used them on all my vehicles.

[Saffy]

Not for recovery funnily enough. JATE = Joint Air Transportation Executive. and JATE rings are provided for Air transportation only.

O    M    G   you had to open that can didn't you  :lol:

[frosty]

  just seen some rings which sit on top of your bumper, bolted through to the chassis ends..think there from a series..are these anygood? i see one of the contributors to the 4x4 magazine has them on his td5 90

[Saffy]

  just seen some rings which sit on top of your bumper, bolted through to the chassis ends..think there from a series..are these anygood? i see one of the contributors to the 4x4 magazine has them on his td5 90

I had them on my series - I uprated the bolts to M12's 12.9 tensile, Stole them then and put them on defenders winch bumper for easier access recovery points because front Jates can be pain to get at errrmmm photo somewhere...



They would be used in pairs with my harness. For front pull the rough math kind of works out with large safety margin for those bolts at that angle (part shear part tensile load) ... but don't ask me to recite how now though!!! The bumper mounts will fail before they do.

[J.D.]

ive got an army center pin bumper(thats what i call it), its reinforced along the middle and has a big tow pin. used it to pull myself out  loads and pulled  a 7-1/5tonner yesteday. i paid £25 for it at eastnor show, ground it down, red oxided it and sprayed it black, really pleased with it

Definately wouldn't use this sort of bumper for any recovery apart from road towing. Some of my guys tried it once with a bellied out Wolf. Ended up with a V shaped bumper. They all found out why jate rings are fitted front and rear to military spec Land Rovers!

Rich

Not for recovery funnily enough. JATE = Joint Air Transportation Executive. and JATE rings are provided for Air transportation only. Though I've never heard of a forged JATE ring snapping. whilst been used for recovery. And I've used them on all my vehicles.

Speaking from experience they tend to bend rather than snap when under extreme load. However, never ever pull sideways on a JATE ring, because they literally tear in half when the bolt goes through

[Suvvey]

JATE rings are certainly secure enough when used for their original intended use



Or I'd certainly like to think so next time I'm standing under one of these ;)

[Litch]

D-rings on top of the bumper are the way to go, they were the original recovery point on Series LR's and the MOD fitted them to all S111's. I have been using them for over 20-years (I currently have a pair on my 90) and think they are excellent.

JATE rings are very strong but if you are deep in the gloop then the last thing you want to be doing is rumaging around below the bumper to find the attachment point. D-rings are mounted above the bumper line and use the bumper fixing points so the weakest point are the HT mounting bolts and the strength of the chassis, nothing else. Anything else sticks out the front and requires the bumper to be strengthened accordingly.

If you were interested I have a brand-new pair for a 90/110. The mounting plate on the early Series items makes them too long for the later vehicles however the later D-rings CAN be fitted to Series vehicles.

[frosty]

  im very interested. pm sent

[Litch]

Frosty, PM sent.