Pages: [1]   Go Down

AuthorTopic: injectors  (Read 1928 times)

0 Members and 3 Guests are viewing this topic.

Offline eugene

  • Posts: 815
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
injectors
« on: January 17, 2010, 18:20:46 »
ive replaced my injectors todat no i have a problem being now when its running there is fuel blowing out of the second pot in round the injector have i done something wrong as ive tightened them as far as i dare to injector was a bit loose when i put it in any ideas will be greatful
thanks
eugene :(
Logged
sj410 wifes offroader
1992 gold 5 door disco winch and bumper spots rooflights .2inch lift. khuno kl 71 265.75.16.rebel steering guard. snorkel
 freelander wifes car
www.norfolk4x4response.org.uk  www.brecklandlrc.co.uk/

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: injectors
« Reply #1 on: January 17, 2010, 18:46:27 »
Sounds like you have missed the copper washer out!!
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline eugene

  • Posts: 815
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injectors
« Reply #2 on: January 17, 2010, 19:12:32 »
is there on on the injector and one at the botton were the injectors sits
Logged
sj410 wifes offroader
1992 gold 5 door disco winch and bumper spots rooflights .2inch lift. khuno kl 71 265.75.16.rebel steering guard. snorkel
 freelander wifes car
www.norfolk4x4response.org.uk  www.brecklandlrc.co.uk/

Offline doda456

  • Posts: 104
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injectors
« Reply #3 on: January 17, 2010, 19:14:25 »
theres one that you put in before you insert the injector,  and another on the fuel return rail


Dont worry there verycheap incuding from main dealers
Logged

Offline eugene

  • Posts: 815
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injectors
« Reply #4 on: January 17, 2010, 19:39:49 »
think il take the whole lot out again and start from scratch and see how it goes there isnt an order they go in is there
Logged
sj410 wifes offroader
1992 gold 5 door disco winch and bumper spots rooflights .2inch lift. khuno kl 71 265.75.16.rebel steering guard. snorkel
 freelander wifes car
www.norfolk4x4response.org.uk  www.brecklandlrc.co.uk/

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: injectors
« Reply #5 on: January 18, 2010, 00:47:11 »
On the later 300TDi the front one is about 3 times the price of any others, if it's an older TDi then they are all the same.  I like to put the wriggel on the injector facing the injector body as it's steel, the flatter side against the head which is ali to prevent it cutting in.  The clamp bolts are not that tight in truth.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline lurch_917

  • Posts: 672
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-1
  • hi all hows it going
    • kettering
  • Referrals: 0
Re: injectors
« Reply #6 on: January 18, 2010, 01:07:30 »
on the bottom of the injector you should have 2 copper washers 1 flat and 1 with a crush ribb the flat one sits against the injector body and then the ribbed one
Logged
As a youth I could run up and down stairs all day now I'm older it takes me all day just to walk upstairs

Offline eugene

  • Posts: 815
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injectors
« Reply #7 on: January 19, 2010, 19:36:29 »
thanks will get them all ready for the week end
Logged
sj410 wifes offroader
1992 gold 5 door disco winch and bumper spots rooflights .2inch lift. khuno kl 71 265.75.16.rebel steering guard. snorkel
 freelander wifes car
www.norfolk4x4response.org.uk  www.brecklandlrc.co.uk/

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: injectors
« Reply #8 on: January 20, 2010, 01:26:06 »
Quote from: lurch_917 on January 18, 2010, 01:07:30
on the bottom of the injector you should have 2 copper washers 1 flat and 1 with a crush ribb the flat one sits against the injector body and then the ribbed one

Crikey, I've only ever seen the ribbed one on it's own 8-[
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: injectors
« Reply #9 on: January 20, 2010, 15:51:34 »
Same here,only ever seen and used a single crinkle one,dont see the point in using 2??
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline eugene

  • Posts: 815
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injectors
« Reply #10 on: January 20, 2010, 19:21:36 »
hunters say only the crimp one is all thats fitted on 200tdi 2.5 has a flat one then a crimp washer
Logged
sj410 wifes offroader
1992 gold 5 door disco winch and bumper spots rooflights .2inch lift. khuno kl 71 265.75.16.rebel steering guard. snorkel
 freelander wifes car
www.norfolk4x4response.org.uk  www.brecklandlrc.co.uk/

Offline stretchy

  • Posts: 414
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: injectors
« Reply #11 on: January 20, 2010, 20:19:43 »

I have had this before ... from what I can remember the coper washer is best when its used only once as it compresses as you tighten up the injector clamp.
I replaced all 4 for less than £1 and that solved the problem.

I put a dab of greas round the injector before puting it back incase I have to get them out again as they can seaze in solid

stretchy
Logged
All the Gear, No Idea!

I break land rovers!
07716989933

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: injectors
« Reply #12 on: January 21, 2010, 13:41:13 »
I oput a dab of grease on to hold them in place before I fit them.

When I did ours a couple of years ago, one injector had been put in with 2 wrinkled washers and IIRC on checking I found it made the spray pattern very very close to the head, that cylinder had more scorch marks on the ali too.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal