Topic: putting 200tdi engine and gearbox into classic range rover which gearbox mounts (Read 1933 times)

Dannyboy · « **on:** February 24, 2010, 18:56:27 »

hi there folks need a little advice concerning me converting my classic range rover from v8 to 200tdi using engine and gearbox from a discovery do i use the discovery gearbox crossmember i do i use five speed v8 gearbox mountings if so which ones cheers folks

Range Rover Blues · « **Reply #1 on:** February 25, 2010, 00:56:34 »

Use the crossmember and gearboc mountings that came with the TDi you are fitting. The chassis are basically the same thing and the TDi crossmember is different to suite that installation. I think the engine sits further forwards in the TDi.

simdeb · « **Reply #2 on:** February 27, 2010, 14:30:40 »

can the range rovers transfer box be used onto the disco gear box ?

Range Rover Blues · « **Reply #3 on:** February 27, 2010, 23:23:52 »

Yes! the LT230 and B_W are fully interchangeable, the B_W has a ratio of 2.02:1.

News:

AuthorTopic: putting 200tdi engine and gearbox into classic range rover which gearbox mounts (Read 1933 times)

Dannyboy

putting 200tdi engine and gearbox into classic range rover which gearbox mounts

Range Rover Blues

Re: putting 200tdi engine and gearbox into classic range rover which gearbox mounts

simdeb

Re: putting 200tdi engine and gearbox into classic range rover which gearbox mounts

Range Rover Blues

Re: putting 200tdi engine and gearbox into classic range rover which gearbox mounts