Pages: [1]   Go Down

AuthorTopic: Sill repairs  (Read 2884 times)

0 Members and 1 Guest are viewing this topic.

Offline MattDilley

  • Posts: 20
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Sill repairs
« on: March 16, 2010, 19:13:28 »
Hi,

I need so welding doing for my MOT and was wondering the best route to go down?
I have seen the repair over sills, but have been advised by a few people to remove the whole sill and weld in a 2x1 inch box section?
Will this be acceptable or am I best using the over sills?
Some help will be much appreciated?

Thanks matt
Logged
If it still workx, why fix it??!!

Offline mikiep1986

  • Posts: 352
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #1 on: March 16, 2010, 19:35:21 »
 on my sills im using 120x60x3 mm hollow steel section . . . makes it alot stronger aswell  ;)
Logged
200tdi disco aka "bertie" ;)

Offline MattDilley

  • Posts: 20
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #2 on: March 16, 2010, 20:44:02 »
So the box section is the way forward?
Logged
If it still workx, why fix it??!!

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Sill repairs
« Reply #3 on: March 16, 2010, 20:52:58 »
It will last longer!
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline wheels244

  • Posts: 266
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Bedale, North Yorkshire
  • Referrals: 0
Re: Sill repairs
« Reply #4 on: March 16, 2010, 22:07:11 »
That's what I'll be doing with mine when they go.
Logged
Defender 200Tdi -  Terrafirma lift,Winch Bumper, Warn X9, Steering Guard, Front\Rear QT Diff Guards, Safari Snorkel, CB, Light Rail, Baja Claws, Flexi Arches, Breather Kit.


Yamaha R1 Powered MNR Kit Car that I built
Now building 220BHP Lotus 7 kit
Fireblade Trackbike

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Sill repairs
« Reply #5 on: March 17, 2010, 05:06:28 »
Quote from: mikiep1986 on March 16, 2010, 19:35:21
on my sills im using 120x60x3 mm hollow steel section . . . makes it alot stronger aswell  ;)

Chap who fixed mine used the same, but 5mm thick steel. I think that and the tree sliders mean that I now have side impact protection!  :lol:
Logged
1996 Discovery 300TDI. She's got it where it counts...

Offline LiftedDisco

  • Posts: 454
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #6 on: March 17, 2010, 08:00:31 »
Hi Matt

Mine are box section - done in some haste in Artic weather prior to a test date in 1st week of January (!) and the MOT man was happy.

Not only that, but using 3mm box, I suspect that the sill replacements will outlast the rest of the vehicle...

If you ever head this way (Towcester), you are welcome to have a gander - tea can, of course, be supplied!

Rob
Logged
Discovery 300 Tdi - 2" lift, side exit exhaust, HD bumpers, T-Maxx 9500, removable tow hitch, snorkel and 235/85's

Discovery 4 Commercial - very standard but very nice!

Freelander 2 TD4 - Fun Prevention Officer's

Offline dave_2A_2.25Turbo

  • Posts: 811
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #7 on: March 17, 2010, 09:21:53 »
What you use also depends on how bad the sills are - is it the inner or outer sill, or both, and to what extent - and on how good a welder you are.  A very good guide to using the box section method can be found at http://forums.lr4x4.com/index.php?showtopic=16471
Logged
Dave
1963 S2A
1992 Disco 200TDi
Sankey Widetrack

Offline soggytomato

  • Posts: 14
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #8 on: March 17, 2010, 10:16:54 »
did mine last year with 100x50x5mm box section and made some spacers up for the body mounts with 10mm plate as i couldnt get any 100x60mm near where i was working.

easy but time consuming to do-took a day a side but i needed to get home in it each night!!! 

i've also now fastened some tree/rocksliders to the sills and they are also jackable if needed
Logged
she's a bit tempermental but aren't we all!!!

Offline weeone

  • Posts: 52
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #9 on: March 17, 2010, 15:15:07 »
Another fan of the Box-Section option.... done both sides of mine now :)
Logged
Off-roader, radio ham, geek, terrier-in-human-form.
Opinionated, volatile, highly strung.
Tolerant, laid-back, forgiving.
Anatidaephobic.

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Sill repairs
« Reply #10 on: March 17, 2010, 15:18:49 »
I do get the impression that you need to be careful how much you cut out before welding the box in. I know on mine they just took out the rotten bits on the visible face of the sills (they weren't too bad, I just found one 3cm hole while preparing to fit tree sliders and the welder found a few other manky bits on closer inspection). As a result there was no problem with alignment as the top of the original sills remained to hold the pillars in the right place while the box section was welded in.
Logged
1996 Discovery 300TDI. She's got it where it counts...

Offline soggytomato

  • Posts: 14
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #11 on: March 17, 2010, 19:59:53 »
thats wot i did on mine-cut out the inner and outer but left some to weld to and left the top in place and then puddle welded the top sill to the box section through some holes-i followed the how to in the technical archive for the range rover sills and adjusted it where needed to fit mine.

can bottom the sills out now without fear of them falling to pieces :roll:
Logged
she's a bit tempermental but aren't we all!!!

Offline MattDilley

  • Posts: 20
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Sill repairs
« Reply #12 on: March 17, 2010, 21:17:52 »
Quote from: LiftedDisco on March 17, 2010, 08:00:31
Hi Matt

Mine are box section - done in some haste in Artic weather prior to a test date in 1st week of January (!) and the MOT man was happy.

Not only that, but using 3mm box, I suspect that the sill replacements will outlast the rest of the vehicle...

If you ever head this way (Towcester), you are welcome to have a gander - tea can, of course, be supplied!

Rob

cheers for the offer rob, might be taking you ip on that? Give me a bit of encouragement to take the grinder to them! Lol

Matt
Logged
If it still workx, why fix it??!!
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal