Pages: [1]   Go Down

AuthorTopic: Series Brake Servo part 2  (Read 2304 times)

0 Members and 1 Guest are viewing this topic.

Offline Bigant45

  • Posts: 10
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Series Brake Servo part 2
« on: March 25, 2010, 21:57:56 »
Bought a new Brake servo today. Its been fitted and i have still the same none assistants from the servo. Hard pedal. Any ideas.
Cheers
Logged

Offline NiteMare

  • Posts: 177
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Birmingham by The Fort
    • Birmingham by The Fort
  • Referrals: 0
Re: Series Brake Servo part 2
« Reply #1 on: March 26, 2010, 11:18:41 »
the vacuum take off point on the manifold isn't blocked with coke and crud is it, hose not leaking/collapsing/blocked
Logged
it ain't broke ...

i ain't fixed it enough

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Series Brake Servo part 2
« Reply #2 on: March 26, 2010, 19:37:49 »
Is it petrol or diesel???
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Series Brake Servo part 2
« Reply #3 on: March 26, 2010, 19:39:59 »
At a guess was your s3 a petrol and the s2 diesel???
Logged
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal