AuthorTopic: Walkthroughs Disco TDI into early 90 (for a mate)  (Read 1294 times)

0 Members and 1 Guest are viewing this topic.

Offline carbore

  • Posts: 1082
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Walkthroughs Disco TDI into early 90 (for a mate)
« on: April 24, 2010, 19:58:44 »
Hello,

The lad up the road form me is transfering a Disco 200 TDi into an old 90 TD. HE seems to think he needs to move some engine mounts is that correct. This makes no mention of movign mounts

http://forums.lr4x4.com/index.php?showtopic=2394

Anyone seen any other good walkthoughs that they can recomend on the web ?

Thanks,
CORNISH SPRINT AND HILLCLIMB CHAMPION 2009

Lotus Elise (Tuned/lightened for sprint racing Championship winner 2009)
Freelander 1 TD4 Auto AKA the Big Black Bus (Brownchurch Roof Rack, Hatch Bag rear liner)
Ferguson T20 "Grey Fergie" TVO Tractor 1951

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: Walkthroughs Disco TDI into early 90 (for a mate)
« Reply #1 on: April 24, 2010, 21:11:34 »
Its the same block/engine mounts,it will fit like a glove.
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline zulublue

  • Posts: 756
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Walkthroughs Disco TDI into early 90 (for a mate)
« Reply #2 on: April 25, 2010, 08:51:30 »
all depends if you use a R380 gearbox, this has a longer bell housing and thus moves the engine mounts forward. the R380 is normaly mated to a 300TDi although you can fit it to a 200TDi. better gearbox than the LT77.

Offline billy badger

  • Posts: 35
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Walkthroughs Disco TDI into early 90 (for a mate)
« Reply #3 on: April 25, 2010, 18:03:40 »
The engine mounts on the chassis are ok. You will need to  unbolt the brackets from the TD block and bolt these to the Tdi block, the holes are there ready to just bolt on.

Offline carbore

  • Posts: 1082
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Walkthroughs Disco TDI into early 90 (for a mate)
« Reply #4 on: April 26, 2010, 07:59:32 »
Thanks, Ill let him know.
CORNISH SPRINT AND HILLCLIMB CHAMPION 2009

Lotus Elise (Tuned/lightened for sprint racing Championship winner 2009)
Freelander 1 TD4 Auto AKA the Big Black Bus (Brownchurch Roof Rack, Hatch Bag rear liner)
Ferguson T20 "Grey Fergie" TVO Tractor 1951

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal