AuthorTopic: petrol t diesel engine swap.  (Read 11532 times)

0 Members and 1 Guest are viewing this topic.

Offline fuzzy

  • Posts: 82
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • my lovely s3 military, Percy
  • Referrals: 0
petrol t diesel engine swap.
« on: September 05, 2010, 23:55:00 »
I have finally had enough of trying with my 2.25 petrol engine, tried everything to get it running, compression is good, has a spark fitted a known good head thinkin it may be warped or cracked, replaced the entire ignition system and fitted a new carb!!!!!!!!!!!!!still no joy. SO i have sourced a 2.25 diesel lump and am soon going to swap them over. Is there any particular pitfalls i should be aware of? or anything peculiar i should know about? Many thanks guys, Fuzz.
1980 s111 109 ex military 12v gs soft top- waiting to have life breathed back into it.
1990 110 2.5td, waiting for crew cab conversion, mud tyres, suspension and 2"lift.

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: petrol t diesel engine swap.
« Reply #1 on: September 07, 2010, 22:54:12 »
The main thing is that you need a fuel return to the tank and thats about it.
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline fuzzy

  • Posts: 82
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • my lovely s3 military, Percy
  • Referrals: 0
Re: petrol t diesel engine swap.
« Reply #2 on: September 07, 2010, 22:58:53 »
I did think that would be all but always best to be sure!! It's an ex military model with twin tanks..so I'm right in thinking that I only need to plumb the return into one of the tanks?
1980 s111 109 ex military 12v gs soft top- waiting to have life breathed back into it.
1990 110 2.5td, waiting for crew cab conversion, mud tyres, suspension and 2"lift.

Offline bogie

  • Posts: 695
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • IF IT AINT GOT LEAFS,ITS NO GOOD!!!!!!!!
  • Referrals: 0
Re: petrol t diesel engine swap.
« Reply #3 on: September 09, 2010, 17:40:13 »
far as i know mate.
1968 SERIES 2A ,200TDI TUNED,RANGE ROVER AXLES,ONE TON SHACKLES,CPC PARAS,ES3000,POLYBUSHED,ANACONDAS.                     1970 SERIES 2A, 200TDI TUNED,5 SPEED LT77 WITH LT230S TRANSFER BOX 1.211 RATIO.ZEUS DISKS ALLROUND.ES3000,MODIFIED 90 TANK,3.5 DIFFS.

Offline baron von ledwidge

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: petrol t diesel engine swap.
« Reply #4 on: October 13, 2010, 14:47:56 »
you will need a stop cable too and obviously a ballast resistor for the glow plugs
Series iii 88"                Series 3 88"
2.25 diesel                  200tdi
 Hard top                     Exmoor Trim hood
checker plate wings     checker plate wings
checker plate sills        parabolic springs
checker plate floor       overdrive
                                    roll cage
                                    corabreu bucket seats   
                                    fairey overdrive
drive it break it fix it

Offline ken110

  • Posts: 32
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: petrol t diesel engine swap.
« Reply #5 on: November 12, 2010, 14:17:34 »
you'll also need to get hold of the throttle assembly.  I kind of fiddled with all the linkages and made up a rod so that it worked of a series of rods rather the original rod to cable set up.  you'll need to do something about the vaccuum too.  the diesel has a butterfly valve in the intake that's connected to the servo and a vac resovoir. I did away with all this and fitted a vac pump off a MGF (sorry for my spelling in this).  I made up a twin pulley to run off the water pump.  brakes actualy work now :)


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal