Pages: [1]   Go Down

AuthorTopic: no brakes  (Read 1896 times)

0 Members and 1 Guest are viewing this topic.

Offline bodgeitjo

  • Posts: 97
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
no brakes
« on: March 10, 2012, 18:17:37 »
i finally got round to putting the new pistons in the calliper(wasnt to hard) and put on new extended hoses.bleed them loads theres no air bubbles at all, yet the pedal goes to the floor. any ideas cheers jo.
Logged
1989 110csw 200tdi                                                                                                                                      If it aint broke fix it till it is.

Offline lambert

  • Moderator
  • ***
  • Posts: 2137
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • and then as if by magic
    • harrogate
  • Referrals: 0
Re: no brakes
« Reply #1 on: March 11, 2012, 08:14:13 »
I trust you bled all 4 rear near side first then ros then fns and then front off side. All the unions are tight and dry and all the pipes are in good order? Is there any resistance in the stroke of the pedal or does it just drop under your finger pressure?
Logged
Lambert Coverdale.

As slow as possible, as fast as necessary.

Two and a half litres of turbocharged diesel goodness.
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal