Pages: [1]   Go Down

AuthorTopic: engine problem  (Read 2642 times)

0 Members and 1 Guest are viewing this topic.

Offline playboaterkev

  • Posts: 40
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • bridgwater
  • Referrals: 0
engine problem
« on: February 01, 2013, 14:57:48 »
hi replaced my water pump on my 94 300tdi yesterday when refitting the belt tensioner i noticed that the threads on the mount thingy was missing most of the way in can i just replace the mount or do i need to do part or all of the engine? Or is there another option ?

thanks hope this make sense
Logged

Offline playboaterkev

  • Posts: 40
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • bridgwater
  • Referrals: 0
Re: engine problem
« Reply #1 on: February 02, 2013, 13:56:31 »
its the water pump housing?
Logged

Offline lambert

  • Moderator
  • ***
  • Posts: 2137
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • and then as if by magic
    • harrogate
  • Referrals: 0
Re: engine problem
« Reply #2 on: February 02, 2013, 15:43:59 »
By missing you mean stripped? I'll  have a look at mine in the morning and see how it ought to be.
Logged
Lambert Coverdale.

As slow as possible, as fast as necessary.

Two and a half litres of turbocharged diesel goodness.

Offline B3T7Y Vitara :-D

  • Posts: 2
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • leictestershire
  • Referrals: 0
Re: engine problem
« Reply #3 on: February 02, 2013, 18:02:40 »
Replace the water pump housing.  :afro:
Logged

Offline playboaterkev

  • Posts: 40
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • bridgwater
  • Referrals: 0
Re: engine problem
« Reply #4 on: February 03, 2013, 01:29:42 »
how big a job is it to replace the water pump housing?
Logged

Offline trecfive

  • Posts: 457
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • If it fit's the hook it'll pull it.
    • Nuneaton
  • Referrals: 0
Re: engine problem
« Reply #5 on: February 03, 2013, 08:03:31 »
Alternater,power steering pump,water pump all taken off, I think there are three more bolts where the "p"gasket goes. Replace with the metal "p" gasket rather than the paper one,no more weeps of coolant.
Logged
1. Range Rover Classic 300tdi SE Auto Softdash
2. Range Rover Classic 300tdi SE Auto Softdash, apparently very rare.

Offline playboaterkev

  • Posts: 40
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • bridgwater
  • Referrals: 0
Re: engine problem
« Reply #6 on: February 03, 2013, 22:56:29 »
thanks for that not to big a job then, will have a look at doing that this week.  :azn:
« Last Edit: February 06, 2013, 07:23:35 by playboaterkev »
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal