Pages: [1]   Go Down

AuthorTopic: Wizardbilt breather kit  (Read 16033 times)

0 Members and 1 Guest are viewing this topic.

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« on: June 25, 2005, 20:42:52 »
Just fitted Wizards 'Ultimate' breather kit :D

Apart from the fact that I opted not to use the timing case breather, fitting was an absolute breeze.

Some pics here:

http://members.mud-club.com/profiles/Digsit/gallery/Wizardbilt

BTW I chose to use the spare input/output (should have been for thetiming case) to run a second pipe up to the top of the snorkel :wink:

What an excellent bit of kit Wizard. CHEERS :D  :D
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

gords

  • Guest
Re: Wizardbilt breather kit
« Reply #1 on: June 25, 2005, 20:47:14 »
Quote from: "Digsit"
Just fitted Wizards 'Ultimate' breather kit

Is that something different/extra to an extended breather kit then?

What's that "block" that the tubes connect to (in the engine bay)?

Did you have any breather pipes beforehand?
Logged

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #2 on: June 25, 2005, 20:57:07 »
This is the kit:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=31348&item=4557040524

Replaces existing breathers to axles and transmisson. That 'block' is a nicely machined manifold :wink:
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

Offline Guy90

  • Posts: 1844
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #3 on: June 25, 2005, 21:00:47 »
I shall be fitting mine to the 110 just as soon as Cliff gives it to me :lol:  :lol:  :lol:
Logged

Offline toger

  • Posts: 237
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #4 on: June 25, 2005, 21:04:47 »
Wizards stuff is great.
Logged
Regards
Toger
2001 Disco2 Td5
www.onthelashwithtoger.com

Offline Jim-Willy

  • Regional Rep
  • *
  • Posts: 2750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #5 on: June 25, 2005, 21:06:08 »
Timing cover? I raised my transmission and axle breathers but didn't know there was a breather on the timing case, is it necessary or just belt and braces?
Logged
'ear all, see all, say nawt; Eyt all, sup all pay nawt; An' if ivver tha does owt fer nawt; Allus do it fer thi sen.

     

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #6 on: June 25, 2005, 21:06:41 »
Quote from: "Guy110"
I shall be fitting mine to the 110 just as soon as Cliff gives it to me :lol:  :lol:  :lol:


It'll be with you tomorrow :wink:  Would have brought it over if you'd said :tongue:
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #7 on: June 25, 2005, 21:08:57 »
Quote from: "jim-willy"
Timing cover? I raised my transmission and axle breathers but didn't know there was a breather on the timing case, is it necessary or just belt and braces?


My question excactly :?  You have to make a hole in injection pump inspection cover (on th Tdi) and attach a breather there. As there is no breather on a standard engine I'm not sure what the benefits are really.
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
Wizardbilt breather kit
« Reply #8 on: June 25, 2005, 21:11:51 »
Quote from: "jim-willy"
Timing cover? I raised my transmission and axle breathers but didn't know there was a breather on the timing case, is it necessary or just belt and braces?


It's a must do thing if you don't want water and muck getting on
your timing belt... You can just fit a wading plug to fill the hole.
Logged
Paul Wright



Offline Jim-Willy

  • Regional Rep
  • *
  • Posts: 2750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #9 on: June 25, 2005, 21:15:01 »
Oh good, i've got wading plugs that i fit before offroading :)
Logged
'ear all, see all, say nawt; Eyt all, sup all pay nawt; An' if ivver tha does owt fer nawt; Allus do it fer thi sen.

     

Offline Guy90

  • Posts: 1844
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #10 on: June 25, 2005, 21:43:54 »
I'm going to fit the timing case one when I get it!
Logged

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #11 on: June 25, 2005, 21:59:54 »
Quote from: "Guy110"
I'm going to fit the timing case one when I get it!


 :roll: I've nicked all those bits :lol:
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Wizardbilt breather kit
« Reply #12 on: June 25, 2005, 22:04:14 »
Quote from: "gords"
Quote from: "Digsit"
Just fitted Wizards 'Ultimate' breather kit

Is that something different/extra to an extended breather kit then


 :lol: No, just what Wizard has labelled the kit for marketing as it contains everything you need to extend the existing breathers :wink:
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

gords

  • Guest
Re: Wizardbilt breather kit
« Reply #13 on: June 25, 2005, 22:06:39 »
Quote from: "Digsit"
Quote from: "gords"
Quote from: "Digsit"
Just fitted Wizards 'Ultimate' breather kit

Is that something different/extra to an extended breather kit then


 :lol: No, just what Wizard has labelled the kit for marketing as it contains everything you need to extend the existing breathers :wink:

I've got extended breather kits (still in their packets :roll: ), but it didn't include the fancy "manifold" :(
Logged

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #14 on: June 25, 2005, 22:08:44 »
Where did you get yours Gordon?
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

gords

  • Guest
Wizardbilt breather kit
« Reply #15 on: June 25, 2005, 22:09:19 »
Quote from: "Digsit"
Where did you get yours Gordon?

From Mr. Wizard
Logged

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #16 on: June 25, 2005, 22:11:16 »
Ah :roll:

Maybe he was not manufacturing the manifold when you bought yours
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

Offline Damonski

  • Posts: 1081
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Cheshire :)
  • Referrals: 0
Wizardbilt breather kit
« Reply #17 on: June 25, 2005, 22:12:05 »
roll on payday  :lol:
Logged
--

Damian

Range Rover Classic 2.4TD  | Disco 300 Mpi | Citroen Xantia Activa
plus other rainy day projects....

Facebook Me

gords

  • Guest
Wizardbilt breather kit
« Reply #18 on: June 25, 2005, 22:13:23 »
Quote from: "Digsit"
Ah :roll:

Maybe he was not manufacturing the manifold when you bought yours

Wonder if he does "upgrades" :-k  :lol:
Logged

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #19 on: June 25, 2005, 22:32:21 »
Quote from: "gords"
Quote from: "Digsit"
Ah :roll:

Maybe he was not manufacturing the manifold when you bought yours

Wonder if he does "upgrades" :-k  :lol:


I bet he would sell the manifold seperately :wink:
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

Offline Dave

  • Posts: 1046
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Wizardbilt breather kit
« Reply #20 on: June 25, 2005, 22:54:52 »
Quote from: "Paul"
Quote from: "jim-willy"
Timing cover? I raised my transmission and axle breathers but didn't know there was a breather on the timing case, is it necessary or just belt and braces?


It's a must do thing if you don't want water and muck getting on
your timing belt... You can just fit a wading plug to fill the hole.


 I have been doing my timing belt today and i have got mud behind the timing belt cover :shock: . Boy is it fun i think every one should do one :roll: .
Logged
DAVE
MUD-CLUB MEMBER 333

 Disco TDI 1998
 Disco TDI 1993    K333 MUD
 Disco TDI 1994
 90  N/A soon to be TDI 1993
 Series 3 1971
 R33 Skyline GTS-T

Offline Andy.

  • Posts: 3289
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #21 on: June 26, 2005, 00:13:28 »
It is a nice piece of kit  :D

You need small hands though to replace your gearbox/transfer box breather bolts  :wink:

http://community.webshots.com/album/329613718vkTXkR.
Logged
Andy Member # 8






My Webshots  (updated 19.06.05)

Offline Digsit

  • Posts: 1481
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #22 on: June 26, 2005, 07:05:21 »
Andy

I see your timing case breather screws into the obvious place (the inspection hole). Where did you get the modified wade plug?

I have actually cheated a little with the gearbox and transfer box breathers for now as I didnt have time to fiddle around up there :wink:
Logged
Vehicle history:
Discovery 200tdi - Charity - went past her expiry date
Discovery 300tdi - Clarity - went into rear of Audi A3
Discovery 300tdi - D'une  - went bang
Discovery TD5 - unnamed - just went


Cliff - In my own little world............visitors welcome !!

Offline Porny

  • Posts: 1413
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Wizardbilt breather kit
« Reply #23 on: June 26, 2005, 09:11:08 »
With mantec's kit, you have to modify the inspection plate (the round plate with the three screws) which is mounted on the timing cover in front of the injector pump.

I can't remember if they supply a modified one, or just a boss you need to weld onto it...

IMHO, the wading plug hole is not the best place to fit the breather to, especially as you you not suppossed to leave these in all the time (or at least take them out regually)... the problem with having it at the bottom is that if your cam or crank seal starts to leak, it will start to fill the beather with oil, and if left long enough will start to fill you timing case.

Also, if fitting a breather to any other component you would want it as high as possible, not at the bottom.


Ian
Logged
Buy me another drink - you're still ugly!

Land Rover Diesel Tuning and Diagnostic  http://www.irbdevelopments.com - Mud-Club Member Discount - pm for details!!!

Offline Andy.

  • Posts: 3289
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Wizardbilt breather kit
« Reply #24 on: June 26, 2005, 10:53:20 »
Cliff I got it as part of a kit.

I may have a spare one so PM me with your address and if I find it I will pop it in the post  :wink:
Logged
Andy Member # 8






My Webshots  (updated 19.06.05)
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal