Mud-club
Vehicle & Technical => Discovery => Topic started by: Jake on July 22, 2005, 17:43:20
-
Hello Toby
click here (http://www.evansuk.ltd.uk/) for a link to Evans UK web site.
:D
-
They make the cages for Kap suzuki, based in Skipton. They do look real nice when you look at the finished item. About a grand from memory.
heres one i prepared earlier
-
I got a quote for a cage for my 90 form these people, £895 which I didn't think was to bad thats for a full external cage to have it fitted as well was £1395 all in and there need the motor for 5 days.
-
I had a close look at their Disco cage....can't say I would replace my existing one with one of theirs. I like mine because it is a snug fit, and nasty little branches will not get between the body and the cage.....*unlike* the demo one they had on display .... you could almost get your arm through the gaps betwixt body and cage!! And I'm not sure it would be very quiet either ;-)
-
hi neil can you tell me at all where you got the roll cage from is nice very nice
-
The disco on the picture has chequer plate on the doors. I saw this at Billing and thought it looks good. Does anybody know where to get it from or how much it costs ?
-
Anchor surplus near me does 3m strips (see pic), but 8/9quid each
Cut a section off that for this cover because I had to remove some of the outer skin to repair the rotted steel behind it
Quite easy to make up with an angle grinder or jig saw, make a cardboard template first and away you go
Must have a company that works with this stuff, failing that try a commercial vehicle breakers yard, lot of fridge wagons and trailers have this stuff in them. Also any company that constructs fridge truck bodies or trailers