Mud-club

Vehicle & Technical => Defender => Topic started by: robbie on August 14, 2005, 22:08:48

Title: Brake ight switch
Post by: robbie on August 14, 2005, 22:08:48

Anyone know where I can get one fo these?? it is for a '85 90. Dont know if they are all the same, but this one fits in the brake cylinder/servo assembly under the bonnet

Title: Brake ight switch
Post by: muddyweb on August 14, 2005, 22:11:31

I'll need to check the part number... but it is a cheap enough item....  might be better off going to somewhere local to save the postage.

https://www.land-rover-parts-shop.com/shop/en/browse/Defender+90/6/0/21/86/321

Title: Brake ight switch
Post by: robbie on August 14, 2005, 22:17:42

Thanks for that Tim, if I cant get one local I'll give the number a call :)

I thought they might be more expensive than that  :shock:

I assume either one will fit . . . . .

Title: Brake ight switch
Post by: muddyweb on August 14, 2005, 22:22:05

The dot ond 'g' are just suffixes because of the different manufacturer... the 'proper' part number doesn't contain them.

Title: Brake ight switch
Post by: robbie on August 17, 2005, 00:31:28

got one locally and it fixed the problem. Strange thing was, when we tested with a meter, we could detect battery through the switch right up to the connector on the rear off side, bu wouldnt light the bulbs every time.... very odd   :?

Thanks for the info