Mud-club
Chat & Social => The Bar - General Chat => Topic started by: landyman Ash on August 27, 2005, 20:14:57
-
Trying to wire in my 300tdi conversion and Im stuck....
I dont knwo how to wire in the fuel cut off solonoid or the glow plug timer.
The timer I can leave (its summer....)
But the fuel shut off I cant.
It has three wires going into it:
Pink/Black
Red/Black
Red
Just to get this thing running, what do I need to wire to what???
HELP!!!! :roll: :oops: :roll:
-
Not 100% sure what the three wires go to, but usually on bosch diesel pumps they only have three wires to the feul cut off if the vehicle has a transponder imobiliser. If this was the case then there is a simple answer if you remove the rear mounting bracket off of the back of the pump then you will find that under the imobiliser module is a standard fuel cut off solenoid. Simpley throw away the imobiliser module and connect a 12v ignition supply to the solenoid and JD. If you require any further info on removing the rear mounting drop us a PM, you can cause damage to the pump internals if you remove the wrong screws.
-
Just take a ignition switched feed to the stop solinoid (switch ope when ingnition on and switches off when ignition off)
-
Whoops.....
I was being a muppet... :oops:
I was getting the throttle guage for the EGR confused with the solonoid :oops: :oops:
Its running now!!!!! :lol: :lol: :lol: :lol: :lol: :lol: :lol: [/quote]
-
Hello mate nice to hear shes running, give us a call tomorrow if your working on her , I'd love to come down and have a look.
-
Oh no, back in London mate!
I'l catch up with you on Thursday. Make sure your there, got something for you :wink: