Mud-club

Vehicle & Technical => Range Rover => Topic started by: paul_humphreys on September 09, 2005, 14:54:48

Title: Springs
Post by: paul_humphreys on September 09, 2005, 14:54:48

I have just gotten a set of new springs for my range rover from eb*y (yellow ones). I know the longer ones go on the back, but as there is no part numbers on them, are each pair handed? If so how do i tell whitch one gos on what side?

Paul

Title: Springs
Post by: barmiebrumie on September 09, 2005, 14:57:09

Hi, longer on the back & if the pairs are slightly different the higher ones would go on the drivers side ( to allow for fatty's like me),

thanks john.

Title: Springs
Post by: paul_humphreys on September 09, 2005, 15:11:49

Quote from: "barmiebrumie"

Hi, longer on the back & if the pairs are slightly different the higher ones would go on the drivers side ( to allow for fatty's like me),

thanks john.

Thanks John, thts they I was going to do it. But ther are the same hight. I do recall someone saying to weigh them and the lightest gos on the passanger side?

Title: Springs
Post by: Range Rover Blues on September 10, 2005, 15:54:03

They aren't handed on a RRC, unlike the Disco the Rangie was designed properly and is balance side to side.  Only the LHD diesel had handed rear springs on it.

Title: Springs
Post by: paul_humphreys on September 10, 2005, 16:08:02

Thanks again.