Mud-club
Vehicle & Technical => Discovery => Topic started by: colintandy on October 06, 2005, 21:34:39
-
has any one tried holding there rear springs into place with a metal hose clamp as i aint put any dislocation cones on rear end and i was wondering if this would work till i get a set any one tried this befor regards colin
-
my disco has jubilee clips holding the top of the rear springs in place,they were already on when i bought it and i haven't had any problems yet!!!
-
ive got jubilee clips on all my motors,(racer,road 90 & dads 110) & they do the job just braw
-
I have heard, though, that you need to make sure the bottom clamp/bracket is in good condition! Ideally an extra strength one :shock:
-
works on mine but i have uprated the lower spring clamps just in case :wink:
-
just been out and clamped the rear springs with them metal thingys yes i know its just gone 10.30 wont have time tommorrow and just fitted wading plugs as i will forget them also tell the wifes away got the kitchen full tools the yard was scatted yesterday with tools and the dogs need a walk just as well i fed kids ha ha nearly forgot but how they remind you
DAD IM STARVING cmon dad we need dinner dad im gonna die
-
so i did feed them i fed them to the pet
-
so i did feed them i fed them to the pet
:shock: :shock: :shock: :shock: :shock: :shock:
Im not coming round your house for tea :wink:
-
so i did feed them i fed them to the pet
bet that keep's the nieghbours at bay :(biglaugh):
John.