Mud-club
Vehicle & Technical => Discovery => Topic started by: Wanderer on October 12, 2005, 20:24:04
-
Ok folks.
When anyone's fitted the wider wheel arches to their 5 door disco. Was there any work involved in removing any of the inside frame between the wheel arch/door shut / quarter panel?
I can see that catching with 33's or 35's
What do you reckon?
Doesn't matter on a three door.
-
I do believe budgie has fitted them might be worth giving him a shout :D
-
Ok folks.
When anyone's fitted the wider wheel arches to their 5 door disco. Was there any work involved in removing any of the inside frame between the wheel arch/door shut / quarter panel?
I can see that catching with 33's or 35's
What do you reckon?
Doesn't matter on a three door.
pm me your email adress and ill send you the pdf instructions
or better than that
see here
http://www.devon4x4.com/user/downloads/Discovery%205%20door%20flares.pdf
and here
http://www.devon4x4.com/user/downloads/Discovery%205%20door%20flares.pdf
-
Ta Mike,
were they supposed to be two different pages?
-
Ta Mike,
were they supposed to be two different pages?
yep 1 and 2
mike
-
Both the same address Mike.
-
I do believe budgie has fitted them might be worth giving him a shout :D
Mine's a nice & easy 3 door Neal. :wink:
But yes, for the flares that D44 sell then you do have to take some of the door frame away for the arch to fit, though I don't know how much. :D
-
Here's the second page:
http://www.devon4x4.com/user/downloads/Discovery%205%20door%20flares2.pdf
-
Thanks Mike and Budgie.
They say pages 3 and 4 are 1 and 2 the parts list etc?
I'll peruse...
-
Ya, they are the fitting instructions that Rangie Spares supply with the flares, I can't remember what was in the first two pages. :wink:
-
Has anybody fitted these arches to a 5 door?
I'm considering a set but I'm not sure how much work is actually involved.
Is it quite straight forward or a bit tricky? :?