Mud-club
Vehicle & Technical => Discovery => Topic started by: barmiebrumie on November 10, 2005, 11:53:59
-
Help please,
Swmbo pulled away at some lights yesterday & three lights on the dash came on & willnot go off :shock: , they are 'abs' 'tc' & the picture of disco going downhill with an arrow under it (hill desent I think),
any ideas please as swmbo is winging already,
Thanks in advance
John.
-
What vehicle is it ?
-
It'll be a Series 2 Disco at a guess.
You need to go and plug it into testbook (or similar). You've probably just got a glitch with one of the sensors. This is quite a common problem among Series 2 Discos.
If you are unlucky the problem will keep recurring and you may have to replace a sensor.
I had this happen frequently until we found that the connector to the ABS thingy (on the nearside of the engine bay) was loose. Fixed by cable tying it tight and not a problem since.
-
What vehicle is it ?
Doh :oops: ,
td5 disco2, ( Hightower ghessed right. )
John.
-
In which case... his advice is spot on :-)
-
No bingo for swmbo this week then :lol: , (psst dont tell her i said that),
John.
-
needs to be pluged into a diagnostic computer (rovacom OR auto logic etc) as one of the ABS sensors has either thrown a wobbly or has died,BTW the ABS sensors are just slightly dear as they come in a hub "unless" you find some 1 to get you them as a seperate part & cut n solder them in
-
the ABS sensors are just slightly dear as they come in a hub "unless" you find some 1 to get you them as a seperate part & cut n solder them in
ISTR that they are available seperately from LR now . . . . . ie, you don't need the hub as well (well, that's what I got)
-
AFAIK they do come seperate,BUT they dont have the plugs on the end so have to cut n solder,well thats what it was like the last time,dunno if they have changed now