Mud-club
Vehicle & Technical => Defender => Topic started by: BigA on November 10, 2005, 17:51:52
-
Hi all,
i have just got myself a dog guard, yes ebay, and purchased without mounting brackets (new that before i bought it), its a genuine Land rover guard.
i was wondering if anybody could post pictures/diagrams of the mounting brackets, to give me an idea of what i need to knock up.
Cheers,
Andy
-
From memory of my 110Tdi (Ben Kentzer (http://forums.mud-club.com/profile.php?mode=viewprofile&u=126) bought my guard)
The bulkhead brackets are bolted onto the (drilled-out-Position of 4 rivets in the corner radi-i of the behind seat bulkhead, with a suitably angled length of 20mm box-section.
The top is held by a folded piece of metal that has a cut-out to meet the 'flange'on top of the guard, this is screwed (self-tapper) into an internal rib in the roof Don't drill through the roof-skin!
A pair of wing-nuts hold the 2 guard to the brackets for removal as necessary
Aren't the brackets available separately from the main-dealer?
-
From memory of my 110Tdi (Ben Kentzer (http://forums.mud-club.com/profile.php?mode=viewprofile&u=126) bought my guard)
Aren't the brackets available separately from the main-dealer?
I did :) However., I've just sold it on eBay... Without the top bracket (it was in the cubby box when the land rover got nicked)
BTM's description of the brackets is pretty accurate :D
As far as I know, the brackets aren't available separately.
Cheers
Ben
-
Aren't the brackets available separately from the main-dealer?
not checked, worth a try, suppose i could even look on ebay :?
Andy