Mud-club
Vehicle & Technical => Discovery => Topic started by: Bush Tucker Man on November 11, 2005, 19:55:08
-
I went to pick 'Small-Child' up from ballet this afternoon, as we approached I 'plipped' the alarm-remote as normal.
On trying to open the rear-near-side door the handle pulled, but it stayed locked.
It was 'persistantly precipitating it down', so I just threw her in through the off-side.
Once home I tried locking/opening a few times.
It still stuck
Child-Lock in use in that side
By manipulating the inner handle (even though it can't open it) the outer handle allowed me to open the door.
Do I
Need to take off the door-card & have a 'root-about' in there.
Is it simply a lazy solenoid (it did for a few days when I bought it in Dec 2002)
Is the linkage possibly damaged
Suggestions on a post-card to the usual adress :lol:
-
could be a few things
I would take the door card off and check the linkage Bend the rod from the solinoid to take the' Slack ' out
Then check the solindoid but it could be the spring in the catch se ebag for them I have fitted two right pain in the bum to fit
Darren
-
so I just threw her in through the off-side.
:lol:
:shock: :shock: :shock: poor girl is she ok
-
so I just threw her in through the off-side.
:lol:
:shock: :shock: :shock: poor girl is she ok
Well she kept talking all the way home, so the top half's functioning normally :lol:
I had a look, haven't removed the trim, the top button isn't rising up to the top.
Well, it does, but if the external handle is operated, it sinks slightly & won't open the door
If the internal button is held up, it functions normally
-
Exactly the problem I have, by the sounds of it! It does it on the drivers door and the nearside rear. I have to unlock with the remote and then put the key in the lock and push the button up a bit more before it will open :roll:
Haven't investigated yet as I don't fancy the potential job :(
-
I had that on a previous disco of mine, i removed the door card and wd 40,d all the linkages, problem cured i think it all dries out after a while and just adds a bit of resistance to the linkage