Mud-club

Chat & Social => The Bar - General Chat => Topic started by: keithdixon on November 16, 2005, 08:06:28

Title: Needing a Winch?
Post by: keithdixon on November 16, 2005, 08:06:28

I am looking to import some winches to the uk,

have got a price of $260 (guessing £160) each including all taxes except any uk taxes.

Does anyone know what taxes are going to be payable as it enters the uk?

AND

as i only want one, i need another 10 people who want a 9500lb winch (Will post spec later)

rgs

keith dixon

Title: Needing a Winch?
Post by: suzota on November 16, 2005, 08:46:09

VAT and import duty.
i might be interested at that price.
i'd want 2.
depends on spec though.

Title: Needing a Winch?
Post by: Bulli on November 16, 2005, 08:53:59

you would be better to make sure everything is clearly declared. If you try to sneak it through the authorities  make up the cost! they will then hammer you.I have paid import duty for eblag items than was maore that the cost-- i have also been lucky once in a while. :wink:
 You also pay duty on shipping charges so make sure you take these into consideration.

Title: Needing a Winch?
Post by: the loon on November 16, 2005, 10:16:30

if prices stays at round about £200 I would be intrested but would like full spec etc before commiting.

Title: Needing a Winch?
Post by: MuddyMachine on November 16, 2005, 14:52:58

dont no about costs, But at £200 I could be intrested too. would need some more details

Title: Needing a Winch?
Post by: Bobtail on November 16, 2005, 15:10:30

Same here very interested but need specs

Title: Needing a Winch?
Post by: littlepow on November 16, 2005, 15:57:58

intreged and interested. But depends on spec.

As to costs,

You'll need to add UK VAT onto the cost of the parts, paperwork and shipping.

Title: Needing a Winch?
Post by: Topple on November 16, 2005, 16:05:19

A few questions

Make ?
Spec ?
Reliability Record ?

There are a lot of cheap winches around at present some better than others, I've heard a few horror stories.

Buyer Beware !

Title: Needing a Winch?
Post by: DISCO-CHRIS on November 16, 2005, 18:13:53

if prices stays at round about £200 I would be intrested but would like full spec,model,pic etc before commiting.

Title: Needing a Winch?
Post by: Jake on November 16, 2005, 20:42:23

Same questions as above
Very interested in one.
 :D

Title: Needing a Winch?
Post by: muddyweb on November 16, 2005, 21:17:05

Quote from: "Topple"

A few questions

Make ?
Spec ?
Reliability Record ?

There are a lot of cheap winches around at present some better than others, I've heard a few horror stories.

Buyer Beware !

Don't forget warranty !   I've dealt with 2 people this week already who bought "bargain" winches and then had to shell out a ton more money because of get-outs in the warranty.    Buyer beware indeed.

Title: Needing a Winch?
Post by: chuggaman on November 16, 2005, 21:21:00

i agree

i am on my third winch in about 8 months


mike

Title: Needing a Winch?
Post by: davidlandy on November 16, 2005, 21:23:06

I beleive that you should buy a quality item and 'go prepared' to spend that little bit extra.

its pays off in the long run, I reckon

Title: Needing a Winch?
Post by: keithdixon on November 17, 2005, 14:10:52

I have had a lot of iterest in these winches, i am still looking into the import tax issue, (don't want to get bitten)

I'll come back to you all when i have the customs issue sorted

Product Information for 9500lb winch


Performance   12VDC
Single line rated pull   9500lb(4310kg)
Motor                   5.5hp/4.1kw,Series Wound
Control                   Remote switch,12ft(3.7m)lead
Gear train                   3 Stage Planetary
Gear reduction ratio   265.2:1
Clutch                   Sliding Ring Gear
Braking Action   Automatic In-The-Drum
Drum size   Diameter   2.5"(63.5mm) Length 8.8"(224mm)
Cable                   94ft of 21/64" diameter(29m of 8.3mm diameter)
Fairlead                   4-Way Roller Fairlead
Remote Control   Included
Battery                   Recommended:650CCA minimum for winching
Battery Leads   2 gauge,72"(1.83m)
Finish                   Black/Dark Grey
Weight                   N.W.84lbs(38kg) G.W.　92lbs((42kg)
Overall dimentions   (L×W×H)21.3"×6.3"×8.6"(562×160×218mm)
Mounting Bolt Pattern   10.00±0.015"×4.50±0.010"(254×114.3mm)

Electric winch with series wound motor
   Capcity   Power   Steel cable   Size (L X W X H)   NW
   9500LB   DC12V   Φ8.3mm X 28m   552 X 160 X 218mm   38KG

Pull, Speed, Amperes, Volts (First Layer)
Line Pull (lbs./ kg)   Line Speed FPM(m/min)   Motor (Amps)
0   24.6ft (7.8m)   80
2000 (907)   14.4ft (4.4m)   180
4000 (1814)   10.6ft (3.25m)   240
6000 (2722)   8.5ft (2.6m)   280
8000 (3629)   7.0ft (2.15m)   330
9500 (4310)   6.4ft (1.95m)   380

Line Pull And Rope Capacity In Layer
Layer   Rated Line Pull (lbs./kgs)   Tatal Rope On Drum (ft/m )
1   9500 (4300)   16.2 (5.0)
2   7700 (3490)   39.0 (12.0)
3   6500 (2940)   68.2 (21.0)
4   5700 (2580)   95.0 (29.0)
Pull, Speed, Amperes, Volts (First Layer)
Line Pull (lbs./ kg)   Line Speed FPM(m/min)   Motor (Amps)
0   22.0ft (6.8m)   80
4000 (1814)   11.5ft (3.5m)   170
6000 (2722)   9.2ft (2.8m)   220
8000 (3629)   7.8ft (2.4m)   280
10000 (4536)   6.5ft (2.0m)   340

Line Pull And Rope Capacity In Layer
Layer   Rated Line Pull (lbs./kgs)   Tatal Rope On Drum (ft/m )
1   10000 (4536)   19.6 (6.0)
2   8000 (3629)   42.6 (13.0)
3   6670 (3030)   72.0 (22.0)
4   5720 (2600)   92.0 (28.0)

Title: Needing a Winch?
Post by: suzota on November 17, 2005, 14:40:45

sounds good to me.
keep me informed of costs.

Title: Needing a Winch?
Post by: landraver on November 17, 2005, 20:23:19

Hi, I may be interested.
Do you have a maker's name?

Jeff