Mud-club

Vehicle & Technical => Discovery => Topic started by: PUX on November 17, 2005, 12:01:56

Title: propshaft 200tdi for a 300tdi
Post by: PUX on November 17, 2005, 12:01:56

will a 200tdi prop fit on my 300tdi or are they diff as mine has givin up the gost so have the oppertunity for a prop from a 200tdi any help appreciated

Title: propshaft 200tdi for a 300tdi
Post by: muddysteve on November 17, 2005, 12:15:24

front should
rear wont

Steve

Title: propshaft 200tdi for a 300tdi
Post by: PUX on November 17, 2005, 12:17:32

cheers steve is that ur rangie in ur avatur if it i want it  :lol: cheers for all the help in this matter i think it is my front prop as the uj is got play in it by the transfer box and the vibration is really bad now  :cry:

Title: propshaft 200tdi for a 300tdi
Post by: muddysteve on November 17, 2005, 13:09:06

Thats the devon4x4 rangie in my avatar

havent got any decent pics of mine yet as its only been on the road 2 weeks.

this afternoons plan is to fit the diff guards and then it'll be ready for some lanes


Steve

Title: propshaft 200tdi for a 300tdi
Post by: Mace on November 17, 2005, 13:09:23

Most rear 300 tdi's have the rubber donut thingy. Swap the diff flange for the 200 tdi flange and the 200 prop will now fit.

Title: propshaft 200tdi for a 300tdi
Post by: PUX on November 17, 2005, 15:00:06

woo hoo got a front prop to go on now so will be doin that tonight so lets hope that fixs the problem now  :?

Title: propshaft 200tdi for a 300tdi
Post by: muddyweb on November 17, 2005, 17:32:53

I thought the front props are a different length due to the different gearboxes.   :?

Title: propshaft 200tdi for a 300tdi
Post by: TUFFTEE on November 17, 2005, 17:55:10

I think Pux will find out later? One way or another?
Lets just keep our Fingers X'ed!!! 8)  :wink:

Title: propshaft 200tdi for a 300tdi
Post by: seph234 on November 17, 2005, 18:01:42

no my 200tdi front prop fitted straight on when i fitted my r380 gearbox  :D

Title: propshaft 200tdi for a 300tdi
Post by: muddyweb on November 17, 2005, 18:03:29

But, did you fit that to your existing 200 tdi engine ?   The engine mounts are in a different place I think.

Hopefully I'll be wrong and it'll just go straight on.

Title: propshaft 200tdi for a 300tdi
Post by: seph234 on November 17, 2005, 18:07:07

yes i fitted it to my 200 tdi i might be wrong but i hope not, good luck pux i hope it fits.  joe

Title: propshaft 200tdi for a 300tdi
Post by: muddysteve on November 17, 2005, 19:11:05

Quote from: "muddysteve"

front should
rear wont

Steve

i did say "should" not will fit

Steve

Title: propshaft 200tdi for a 300tdi
Post by: PUX on November 17, 2005, 20:50:11

:tongue: thew it went on bein out for a drive all seems fine  [-o<  for now but as soon as i went to switch on the inside light that dont work now  :lol:  cheers guys for all the input lets hope. Im still goin to get me one of those td5 props so tim i will be speaking to you soon  :D

Title: propshaft 200tdi for a 300tdi
Post by: PUX on November 18, 2005, 21:18:47

Right i have fitted my new prop off a 200tdi but which was a little bit shorter than my 300tdi prop but it fitted a little stretched but nothing bad its fine on the road but when i go off road will it be a risk of it popping out or should i shut up :oops:  :?: