Mud-club
Vehicle & Technical => Discovery => Topic started by: bambamjj on November 18, 2005, 09:42:26
-
Has any one fitted Early Rangie seats to a 200 Disco?
Front and Rear.
Jon
-
Same front sub-frames/mounting-boxes as far as I'm aware.
The rear ought to be a similar width
After all the 'Re-Discoverys' used R-R seats in a Discovery body
http://www.simmonites.com/vehi/redisco.jpg
-
I like that alot, seen a few pickies in LRO, is it actually a simple mod to do, would not mind having a go myself
-
I can't remember the name of the company off the top of my head (possibly "Nationwide") but they do reupholstery and retrims and advertise in all the LR mags and I know they used to offer this as an upgrade for Disco's (and probably still do) so clearly it can be done.
Anyway at the end of the day, a Disco is basically a RR classic with a new body on top (and even then a lot of the dimensions/angles are the same)
-
i've got a set in beige velour if anyone wants to have a go (vogue spec with the arm rests etc)
Steve
-
Is that front and back seats? what condition are thay in, could be interested if the price and condition were right.
-
in good nick, front and rear
only damage is the piping is missing on the edge of the drivers seat (its not really noticable)
just could do with a clean
Take em away they are just taking up space in the garage
Steve
-
now thats a cracking price......who could say no :shock: :wink:
-
Sounds like a bargain will PM you for arrangements.
-
I tried fitting RRC seats to my disco and found that you have to remove the door pockets otherwise they stop the door from closing as the RRC seats are wider. :?
-
Ive just put a set into my 110. Bloomin comfy, and the jack you up a bit too.
Just need a smaller steering wheel, if anyone has one cheap.
-
I tried fitting RRC seats to my disco and found that you have to remove the door pockets otherwise they stop the door from closing as the RRC seats are wider. :?
The Disco is a little narrower.