Mud-club

Vehicle & Technical => Discovery => Topic started by: TUFFTEE on November 29, 2005, 18:39:46

Title: Needed A Cure? For Polished Pulley wheels
Post by: TUFFTEE on November 29, 2005, 18:39:46

After Being Diagnosed with Polished Pulley Wheels and Belts Slipping? :shock:
Both Belts Are only 6 Months old and are nice and Tight! :?  
I need a tried and tested way for solving the Polished Wheel Syndrome?  :(
Tried Brake Fluid (Just a Tiny amount ) and that Worked for a while! But now need a more perminant Solution! :wink:
                                      Cheers!!

Title: Needed A Cure? For Polished Pulley wheels
Post by: Porny on November 29, 2005, 20:42:01

Are they decent quality belts??
Are tensioned correctly - i.e. not overtight!!!

You can buy a proper spray, but shouldn't really be needed.


Ian

Title: Needed A Cure? For Polished Pulley wheels
Post by: 500bhp on November 29, 2005, 21:47:39

I used an old trick of holding a bar of soap against the spinning belt, worked a treat on mine...... :D