Mud-club
Vehicle & Technical => Discovery => Topic started by: colintandy on December 06, 2005, 23:41:27
-
:(kerching): :(bloodshot): :(bloodshot): i have had a xxxxxx day it started to rain as i was changing my radiuse arms on disco got the old ones of after 3 hrs :? put the new ones on :(mad):tighter than a nats chuff :(bigshock): anyway as im tryin to line holes up and put my heavy axel plate back all at same time needing 7 pairs of hands and a 4 tonne jack hammer :(bigshock): i went and lost my temper :(mad): i went and hit my head on my nice strong scorpion racing front winch bumper check out the damage was not funny at time is to be continued as i havent finnished yet ..cant wait for round 2 tommorow :(
-
I hope you did not damage the winch bumper??
Paul
-
:D i might tommorow :wink:
-
OOH ERR!! :shock:
NOT CATCHING IS IT? :roll:
-
Thing is how ugly were you before the bump LOL :lol: :lol:
-
Did you bump ya nose too Col :lol: :wink:
We know which side you slept on last night, I can feel the pain :? :cry: Hope you get it done with no more bumps and scrapes :wink:
-
Please do the otherside today so I can stick double sided tape on your backside and sit you on my dash:!:
Protected by an evil colintandy :lol: :wink:
-
Colin you should'nt lose it? Walk away! have a cup of tea! calm down! :x
And then go back! :)
I usually find that things go a lot better this way!
Especially when i can't get this lined up?
or
this bolt through that hole Etc etc!
So the Magic Tea is Best! 8)
Nasty egg you have there? :cry:
-
Dont worry mate, when the other horn comes up you wont need a devil duck :wink:
-
oooooouch! - that looks nasty.
Nice radius arms though :wink:
-
Been there....
done that.....
These damn winch bumpers are dangerous.
I was helping Bev out one night when he'd broke down at the Ambergate GLASS camping weekend.
While going back to my motor, on a grass verge, I went full length and missed the rear recovery bumper by only millimetres with my head as I went over.
Some say it might have done some good if I'd hit it :lol:
Everytime I'm working on the front wheels I catch that damn winch bumper.
-
Thinking back to when I catch my head and looking at the damage you did Col I can only assume that was one hell of a "my head hurts" dance that you did afterwards. :)
-
:(biglaugh): :(biglaugh): :(biglaugh): :(biglaugh): i beat it today radiuse arms on proper good now with new polybushes havent road tested yet :cry: bit icy now on roads will try later tonite when i go pick wife up from work dont know what to expect though :wink: hope it has tightened all steering up and stops the wandering and drifting heads better now these things are here to test us he he he :(scared): i beat the bitch! in the end not the easiest of jobs to do on a winters day in december lying on back most time its when you get up it hurts like hell on the old knees :cry:
-
I split my top lip doing mine, 3 stitches.
-
I've got the QT ones with a 3 laser cut into the arm and cursed when I went to take a photo and was just about to post it on MC when I spotted the picture looked inverted.
Looked at the arms and they were on the wrong side.
Yes I did have to go out and change them around. :)
-
nasty bump that.
you better hope it doesnt grow an eyebrow!!!!
lol
mike
-
:(kerching): :(bloodshot): :(bloodshot): i have had a xxxxxx day it started to rain as i was changing my radiuse arms on disco got the old ones of after 3 hrs :? put the new ones on :(mad):tighter than a nats chuff :(bigshock): anyway as im tryin to line holes up and put my heavy axel plate back all at same time needing 7 pairs of hands and a 4 tonne jack hammer :(bigshock): i went and lost my temper :(mad): i went and hit my head on my nice strong scorpion racing front winch bumper check out the damage was not funny at time is to be continued as i havent finnished yet ..cant wait for round 2 tommorow :(
OOOOOOOUCH BET THAT DID HURT !! A LOT