Mud-club
Vehicle & Technical => Discovery => Topic started by: muddymart on December 14, 2005, 16:19:42
-
After all your helpful advice over the lift kit, i now need the rear body crossmember, does anybody know where the cheapest place to purchase them from......Thanks :lol:
-
Think this is the one £17:50 from paddock. Or there is a rear body cross member £109
http://www.paddockspares.com/shop/system/index.html
Ps look down the list.
-
If it's the rear cross member that mount the rear of the body to the chassis I would say it's this one from Paddocks
LRD157 - Rear Body Crossmember @ £109.00
-
If it's just the mounts onto the chassis that have gone and not the main crossmember itself then I have a contact that makes new mounts.
Just cut the old ones off and weld the new mounts in place, saves removing to whole thing!! :wink:
See this thread (http://forums.mud-club.com/viewtopic.php?t=14948&highlight) for details. :D
-
I made my own out of 1.6mm plate. Not too bad a job to do as long as yo have something to weld on to :cry: :wink:
-
Thanks for your tips on the brackets,but its the whole x-member i need,its in a really poor state, i post a pic when i get the disco back tomorrow,as it's timing belts getting changed,200k think it needs replacing,!
-
i had to change mine out last year
got it from paddocks
its not an overly hard job. biggest task was cutting the welds where its joined to th euprights behind the quarter panel
all in with the boot floor it took a me a full day