Mud-club
Vehicle & Technical => Discovery => Topic started by: muddysteve on January 07, 2006, 16:32:54
-
just browsing under the bonnet today ive noticed i've lost quite a bit of clutch fluid. the area around the slave cylinder seems damp however it doesnt look like a rangie set up more like a disco with the starter motor etc being on the opposite side. it appears to be leaking from a round disc shaped thing bolted to the plate that the slave is attached. the flexi seems to go into this and the back out the same side in solid pipe into the slave cylinder.
the question is have i got a damper thing like the tdi disco has and is it this leaking?
Thanks in advance
Steve
-
If it's a diesel then it will have a damper. The petrols don't need them.
-
What does it look like and is it the thing down near the slave cyl?
Sorry for all the questions but never looked at a landy clutch
Steve
-
Well it's round and as you described it'll have a fixed metal pipe to the slave cylinder. Along with another pipe that will have a flexi portion of it up to the master cylinder. Goldy colour under the mud :)
-
thats the one :D
looks like a job for me next week then :x
Steve
-
Took mine off when we did the clutch about 14 months ago... must get round to putting it back on one day :wink: :lol: :lol: :lol:
-
Mines leaking from the back of the slave cylinder.
It looks like the fluid is leaking from the pipe fitting on the slave cylinder.
When i tried to get the pipe from a local "4x4 SPECIALIST" i was told.
"Nah mate main dealer only" :shock: :shock: :shock: :shock:
-
If its the pipe i'll just make one myself, looks like the same size as a brake pipe to me :wink:
Steve
-
The slave cylinder pipe connector size changed around 1990 ish.
The later slave cylinder has a larger bore pipe.
So it may or may not work on a 1990 vehicle.
-
Mines leaking from the back of the slave cylinder.
It looks like the fluid is leaking from the pipe fitting on the slave cylinder.
When i tried to get the pipe from a local "4x4 SPECIALIST" i was told.
"Nah mate main dealer only" :shock: :shock: :shock: :shock:
get them to order it in from the main dealer :shock:
where i work main dealer is in regularly getting bits from US & also work gets stuff almost daily from dealers
-
I say my good man you appear to be in the wrong section :lol: :lol:
-
I say my good man you appear to be in the wrong section :lol: :lol:
dont start :roll:
Steve
-
thought you,d like that :lol: :lol: