Mud-club

Vehicle & Technical => Defender => Topic started by: snezza69 on January 09, 2006, 18:21:52

Title: 300 TDi bits desperateley needed.............HELP!
Post by: snezza69 on January 09, 2006, 18:21:52

I am rushing to get some work completed on my 300 project but as the donor vehicle is a 2.5 n/a I am having problems with some of the bits.  Does anyone have the diaphram which connects the front bulkhead to the transmition tunnel? There are loads of other bits and pieces (too many to mention), do you have or know anyone who has odd bits lying around.

Frustration is setting in now!

Thanks.

Title: bits
Post by: timberdog on January 09, 2006, 20:04:54

300 tdi maifolds and Turbos?.

Title: 300 TDi bits desperateley needed.............HELP!
Post by: snezza69 on January 09, 2006, 20:09:51

Got the manifold and turbo but need the pipes to fit them to the rad and intercooler.

Title: 300 TDi bits desperateley needed.............HELP!
Post by: mud-club-matty on January 09, 2006, 20:24:23

if u need to order bits try midland 4x4 if u need contact number please email me

Title: 300 TDi bits desperateley needed.............HELP!
Post by: snezza69 on January 09, 2006, 20:51:18

Yes please that would be great.

Title: 300 TDi bits desperateley needed.............HELP!
Post by: mud-club-matty on January 09, 2006, 21:13:22

ok email me on thedaddy1985@aol.com

Title: 300 TDi bits desperateley needed.............HELP!
Post by: landyman Ash on January 09, 2006, 21:14:19

Ive got the disco 300tdi pipe, you would need to bend it to get it round arch but your welcome to have it mate

Title: 300 TDi bits desperateley needed.............HELP!
Post by: snezza69 on January 09, 2006, 22:45:57

What do you want for it?

Title: 300 TDi bits desperateley needed.............HELP!
Post by: landyman Ash on January 10, 2006, 13:38:40

Quote from: "snezza69"

What do you want for it?

Swop you for a beer (£2.50?)

I'll weigh it and get postage cost for you bud, should not be much,

Its only the main pipe, it does not have the rubber end bits but you may have them or could just use standard pipe as I think they are straight, I'll have a look at my Tdi