Mud-club

Vehicle & Technical => Discovery => Topic started by: wizard on January 17, 2006, 18:17:25

Title: PCD required
Post by: wizard on January 17, 2006, 18:17:25

Hi
Does any one know what is the Pitch Circle Diameter of the Disco 2 wheel studs are.

failing that can someone with a D2 measure (accuratly)the distance between two stud centers (two studs next to each other).

Regards
wizard

Title: PCD required
Post by: kevhenson on January 17, 2006, 18:21:44

Make - Land Rover Model - Discovery 2 Year - 98> PCD - 5x120 Offset - 30 to 50 Bore - 70.1
Recommended fitments, 16" 2357016.
If package tyre is different from our recommendations, click to upgrade or remove tyres.
Results may show a 4 or 5 stud picture, ignore this as results are listed by fitment. Tyre calculator.  


compliments of rochford tyres...hope it helps

Title: PCD required
Post by: wizard on January 17, 2006, 18:23:57

fanks i recon that is 70.1mm

Cheers
wizard

Title: Re: PCD required
Post by: Hightower on January 17, 2006, 19:20:41

Quote from: "wizard"

Does any one know what is the Pitch Circle Diameter of the Disco 2 wheel studs are.

Whatcha building now?  or is it top secret?

Title: PCD required
Post by: wizard on January 17, 2006, 19:23:04

I am making some more jack racks, to carry a Hi lift on the spare wheel carrier.
I have made some for the D1 and just need to make the base plate for a D2

wizard :twisted:

Title: PCD required
Post by: kevhenson on January 17, 2006, 20:11:40

think you'll find the hole in the middle that covers the hub centre is 70.1 mm... the pcd is 120mm
im sure someone will correct me if im not reading it right

Title: PCD required
Post by: J B on January 17, 2006, 20:23:10

just a thought !!

is it wise carrying all that weight on the tailgate, bearing in mind my tyres are 31/10.5/15 and allready weigh more then standard, i would have thought the hinges would give up pretty qiuck

Title: PCD required
Post by: wizard on January 17, 2006, 21:07:35

Hi
Mrs wizard ( who knows everything) worked out that with a PCD of 120 mm each of the 5 studs will be 70.53mm apart.

Do you know how hard it is living with a know all !!!

As to the weightMrs wizard said.........




only joking

wizard :twisted: