Mud-club
Chat & Social => The Bar - General Chat => Topic started by: the loon on January 21, 2006, 17:57:04
-
working on the disco :?
waxoyled chasis and inner wings
Fitted airhorns (both mine and disco geordies)
cleaned up tow bar and fitted a tow ball
remounted airfilter (old mounts had come apart)
Started fitting CB (cut wrong wire and lost rear washwipe but soon fixed that)
Still need to finish fitting CB (just needs wiring to electrics)
Also want to take out rear load liner and hammerite the floor pannel
But all in all been a productive day
:D
-
Good Lad :)
now that you are practiced in the ancient art of wax-oiling, you can do mine if you like ;)
I only wish I had the time..........
-
Good Lad :)
now that you are practiced in the ancient art of wax-oiling, you can do mine if you like ;)
I only wish I had the time..........
You bring the beer and the waxoyl .....
:wink:
-
I waxoyled my chassis and inner wings and all the other underneath bits last summer, really paying dividends now as loads of mud just flakes of when it dries leaving a nice clean waxoyled surface again, still have to use the jet washer though for those areas that seem to scoop mud up by the kilo!. Will do it again this summer when its all nice and dried out.
-
I changed my front discs and pads today, and then helped Paul (EA51MUD) change his pads all round.
Need to get hold of some rear discs and do those next weekend . . . :wink:
-
I waxoyled my chassis and inner wings and all the other underneath bits last summer
I would probably say if your offroading do it about every six months rather than 12.
I know with the 90 six months seemed to be about right to keep a good coating on
-
And Flakey's looking better for it to!!
-
valeting my discovery,in and out, very nice it looks too for a cheapie bargain.
mobile valeting service is available ...........over 8 yrs expreince........
-
Need to get hold of some rear discs and do those next weekend . . . :wink:
There's a set on E-blag m8
-
Need to get hold of some rear discs and do those next weekend . . . :wink:
There's a set on E-blag m8
Cheers for that, but I think that they are for D1. I need D2 ones :wink:
-
I waxoyled my chassis and inner wings and all the other underneath bits last summer,
am i just being really lazy... thinking of getting mine done by this chap...
http://www.before-n-after.co.uk/why1text.htm
anyone used them? recommendations etc?
-
...working :(
Well hopefully at least any of you with <airtime proivider deleted> mobiles should be able to get your repairs booked again ;-)
-
I waxoyled my chassis and inner wings and all the other underneath bits last summer,
am i just being really lazy... thinking of getting mine done by this chap...
http://www.before-n-after.co.uk/why1text.htm
anyone used them? recommendations etc?
i had a website in my favourites that was about a 110 that some1 built & had before & after to do the waxoiling,had a pic from underneath & there was loadsa a missed bits :evil: will try n find it again
-
Thanks for the airhorns loony.
Well today I stripped and cleaned up the boot floor, bit of a mess across the rear crossmember, a coat of Krust and then black hammerite tidied it up lovely :lol:
-
this weekend I have been mostly.....
lying on my back with spanners in hand and oil and dirt dropping on my head :roll:
mike
-
This weekend i nearly killed my NSF wheel bearing.
Its been feeling a bit dodgy for a couple of weeks but i decided to leave it :roll:
There's all the parts i need to fix it turning up tomorrow.
So i'll be fixing that in the dark after work.
Also i painted the rear cross member and front bumper on SWMBO's Series 3.
See here (http://members.mud-club.com/profiles/Jake/gallery/Series3/2/8db074f08f4046504f9d93a74dd1dfcf.jpg/) and here (http://members.mud-club.com/profiles/Jake/gallery/Series3/2/4d15b84090bf0af2628e71b4c18abed3.jpg/) for pictures.
Kate's well pleased with it.
(brownie points earned :wink: )
:D