Mud-club
Chat & Social => The Bar - General Chat => Topic started by: Fingers Mclean on January 23, 2006, 13:59:01
-
Hi Guys,
just asking as I know there are many members that know someone or have the knowledge in making rock sliders. I have a pair of scorpion racing rock/tree sliders on at the moment :) but now I have cut the arches and put the bigger tyres so they don't fit...so my question is do I cut mine and re-weld them or do I get someone to build me a pair or build my own with a little help from a friend :? :? decisions decisions :? :? Some advice would be great or even info or a member possibly that make good quality sliders. cheers guys Ali :wink:
-
personally i would just cut them and reweld them myself i,m in the process of making some when time allows ( which it isnt at the minute) :(
-
i have a set in my shed at the moment mate that you are more than welcome to take measurements ect off. been meaning to fit them for the last couple of weeks but not got around to it yet :wink:
-
I've got the same problem with mine.
I got mine from Mark at Discoparts and he said he'd chop them down for me. For a fee :)
-
I have chopped mine, easy job , did nt even remove them, just re-welded the end plates on, jobs a good un.......
-
I've cut mine down too, then caped the ends and repainted them.
-
I've cut mine down too, then caped the ends and repainted them.
The problem with mine is..that they are not just a straight peice of box :? They have the tree slider part fitted (tubing)
http://www.scorpionracing.co.uk/OFFROAD/Products%
So the cutting down and re-welding is going to be a pain in the butt :oops: :oops: as i have to shorten both ends :oops: :oops: