Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: scottydj2 on January 23, 2006, 20:37:40

Title: Series 3 rear prop-shaft UJ size?
Post by: scottydj2 on January 23, 2006, 20:37:40

Hi.

I need to order a couple of replacement UJs for my rear prop-shaft.

I *think* a 1979 is the later larger size UJs, but not sure (and can't measure at the moment).

Anyone know which before I order the wrong size  :?

Cheers,

Scott

Title: Series 3 rear prop-shaft UJ size?
Post by: scottydj2 on January 24, 2006, 16:08:44

Answering my own questions again  8)

It's the larger 3 and 3/16 size.


Scott.

Title: Series 3 rear prop-shaft UJ size?
Post by: James.Harwood on January 28, 2006, 20:44:43

For the extra cost it would probably be worth replacing the entire shaft.  I replaced front UJ's just to have the slider sieze 12 months later and take out the splines.  

A 1979 is probably going to be fun as some parts were fitted and tested for defenders about then (found that out on Inked ravens 88") and were not in the S3 parts manual.