Mud-club
Vehicle & Technical => Discovery => Topic started by: Mace on February 02, 2006, 11:37:32
-
Does anyone have a side exit exhaust system on their Discovery ? I managed to fold my rear tailpipe back on itself on Sunday so as I need a new one, I thought I'd go for the side exit option and route it up and out of the way.
Anyone got one ? Who makes them ?
Thanks
-
I don't know of anywhere that you can get them "off the shelf", most people make their own. An exhaust specialist could custom make one for you, i wouldn't like to hazard a guess at the price though.
-
Does anyone have a side exit exhaust system on their Discovery ? I managed to fold my rear tailpipe back on itself on Sunday so as I need a new one, I thought I'd go for the side exit option and route it up and out of the way.
Anyone got one ? Who makes them ?
Thanks
i have one mate comes out on the rear wing etc etc if u can wait till tomoz afternoon i will take some pics of it under the disco and how it comes out etc then u can see how it was done if ur handy with a welder and a grinder then u can proberly do it ur self :wink:
-
Does anyone have a side exit exhaust system on their Discovery ? I managed to fold my rear tailpipe back on itself on Sunday so as I need a new one, I thought I'd go for the side exit option and route it up and out of the way.
Anyone got one ? Who makes them ?
Thanks
i have one mate comes out on the rear wing etc etc if u can wait till tomoz afternoon i will take some pics of it under the disco and how it comes out etc then u can see how it was done if ur handy with a welder and a grinder then u can proberly do it ur self :wink:
Cheers Pux, I'm no expert but I know a man who is :-)
-
Does anyone have a side exit exhaust system on their Discovery ? I managed to fold my rear tailpipe back on itself on Sunday so as I need a new one, I thought I'd go for the side exit option and route it up and out of the way.
Anyone got one ? Who makes them ?
Thanks
Hi Mace,
If you want a stainless steel one call oddjob he makes them and to any spec :shock: :shock: twin rear box anything and he's quite cheap considering..he will even make it in 3" if you want..PM me and i will give you his number :wink: He's building me one and he has a V8 90 in at the moment having a full stainless steel system with headers :shock: :shock: in 3" should sound kin great!!!! let me know :wink: Ali
-
PM BULLI, Hes got one
-
before i read this i hadnt even thought of a side exit pipe...... oh god. now im thinking about it :D . so what are the benifits apart from looking good
-
so what are the benifits apart from looking good
Basically, it doesn't hit the ground on steep drops, etc :wink: I've thought about it a few times but never got round to doing it ... yet :wink:
-
Basically, it doesn't hit the ground on steep drops, etc :wink: I've thought about it a few times but never got round to doing it ... yet :wink:
ah i already have a towbar that stops that happening :lol: :lol: but still thinking about it. might have to look into this somemore now. :wink:
-
Cheers for the replies. Pm's on their way.
I'm not after anything POSH :-) I removed my LR tow Bar and I've got a tank guard fitted so that takes the brunt of the knocks but the lowest thing now is the exhaust tail pipe. I just want it up out of the way.
I put myself in a nice deep dry hole on sunday, perfectly made for a 90 (but not a Disco). My departure was a tad too slow so I lost front end grip. No probs, just back her up and have another go.....creeeeeek rear exhaust pipe now facing forward :shock:
Time for a few alterations !!!!
-
let me know how you get on mace as i woulndn't mide a side exit exhaust for my v8 disco
-
P.M dad mate i know he took a bit of flexie pipe of big blue that came out the side, he might still have it :D
dan
-
Fingers unless you have a really highly tuned v8 i wouldnt go as big as 3 inch for the headers....gas flow may be a little too high.
I have a side exit system with massive chav stailess oval end pipe. Only i silencer and sounds great without being too load.. I will try to get a few piccies as the only ones i have are from with my trailing arm broke and the wheel flattened it a little.
I have removed all the lower rear panel so it sits very high up...as for the towbar protection system- one of our club members removed his towbar on a hard lane causing no end of damage.....
-
Fingers unless you have a really highly tuned v8 i wouldnt go as big as 3 inch for the headers....gas flow may be a little too high.
I have a side exit system with massive chav stailess oval end pipe. Only i silencer and sounds great without being too load.. I will try to get a few piccies as the only ones i have are from with my trailing arm broke and the wheel flattened it a little.
I have removed all the lower rear panel so it sits very high up...as for the towbar protection system- one of our club members removed his towbar on a hard lane causing no end of damage.....
Bulli ... :? I have'nt got 3" headers..I was saying a guy has just had fitted a 3" system not that he had 3" headers..Stainless steel headers yes..And that it was oddjob that has fitted and built it :oops: :oops:
I hope i have explained things better :wink: :wink:
-
i thought you were building a drag car!!! 7.2 litre big block for a mo!
-
Not yet!!!! :P :P :P Been thinking of puttin a V8 GMC Diesel in though :P :P :P
-
one of the guys in the ncgl has one in his rangey, having loads of probs with it. The yanks dont bother with the gmc at all, pm rollazuki he's your man for intresting engine info.
heres a piccy of it, the owner is lurking just in front!
-
heres mine on the racer (http://members.mud-club.com/profiles/RedlineMike/gallery/racersnewrubber/0/3573c298dd712983c0e011d79939888f.JPG/) Internal pic
(http://members.mud-club.com/profiles/RedlineMike/gallery/racersnewrubber/0/5afbe5412cf89716cfe447b5957ebbd3.JPG/) external pic
-
Saw a rangy with a tubular rear bumper and fixed the pipe from the exhaust to it so it vented out at the ends of the pipe :wink:
-
Do you mean like this. No don't know anyone :wink:
-
Dave, I've always liked you mate :D
-
Do you mean like this.
Dave - nice 'n' neat - but is that "legal"? I would love to do it on my 300 Tdi (get a curved section made up to attach the back section to), but wondered how I would get a flush finish.
Horness
-
The best thing about a side exit exhaust is when you start the motor up. That puff of black smoke with spots of oil in it goes all over whatever your parked next to. I nearly got lynched by my mum for covering her white front door last week. :twisted:
-
I do believe it is leagal as the man who does my mot has his the same. "But you never know" the bit that stickes out is just trim and can be pushed in more if needed.
-
had side exit on my disco from top gear racing aylesbury will make anything you want tel. 01296433011 say mike recomended them
-
How much did they charge you Mike?
I could do with one for mine.
:D
-
JAKE depends what you want i had y. piece back £300 if you just wantedtail pipe re.routed through side not too expensive .i think a system for 300 tdi is about £300 thats stainless 1 box sounds good frees bottem end up if you want phone tell them mike from broadway told you
-
Cheers for the tip
:)
-
guys i will get some pics up for ya juat been so busy this weekend so will get into gear soon :wink: