Mud-club

Vehicle & Technical => Defender => Topic started by: doctorvaltar on February 11, 2006, 21:54:05

Title: Ignition switch wiring
Post by: doctorvaltar on February 11, 2006, 21:54:05

I'm just in the process of putting the wiring back in the dashboard of my 90. Whoever owned it before me cut of all the plugs on the wires to the ignition switch when they changed the wiring loom. It appears I have four wires, brown, white, brown/orange and white/red and five terninals on the switch. Does anyone know which wire goes where, the switch terminals are labled 1-5 and are various sizes  but that does not help when the ends of the wires are bare?

Title: Ignition switch wiring
Post by: stefan on February 12, 2006, 17:12:50

This is what it should be (for a 4cyl petrol/diesel), just had to change mine again!!

1 = White/red wire (Starter motor)

2 = Brown wire (Main live feed)

3 = White (Position II feed)

5 = White/orange (Position I feed)

Hope that helps?

Stef

Title: Ignition switch wiring
Post by: doctorvaltar on February 13, 2006, 11:57:18

Thanks very much, I'll give that a go!!