Mud-club
Vehicle & Technical => Discovery => Topic started by: petergalileo on February 18, 2006, 19:49:39
-
Guys, is there a difference between the front indicators fitted to a TD5 and those fitted to a 300 series ? I notice the panel under the headlights and indicator on a 300 is wider at one end while on the TD5 its the same width all the way along. So are the TD5 indicators larger ?
Also, does anyone have the part number for the TD5 front indicators ?
Thanks Guys
-
The TD5 ones are longer in height.
Personnally i dont know if they could be fitted to a 300 but, with all the right parts, i cant see why not.
-
Well I am actually going to try and fit them all to a 200 series. I was just a bit puzzled by the bottom panel.
-
You will have to cut the wings at the top where the indicators will sit..as you see the td5 is square compared to the 200 or the 300 tdi
http://snap21.photobox.co.uk/979411946f2960d4f4f5cc2e27ee80d5b8d81e4adad02a349d54b8e7.jpg
http://snap25.photobox.co.uk/038241201af4421ad55ebf2b22c4ecef0ef515a15af06fb23a410d2c.jpg
If your going to start cutting wings then you might as well fit these
http://snap23.photobox.co.uk/061215258e72c58baa8c707c634613a0e3fa02cf912e6e279661262c.jpg
:P :P :P :P
-
Take it from me, I would but they cost a small fortune, even on eblag they are like £200+
thanks for the info on the indicators though, will look forward to cutting my wing up.
I actually bought a set of Discovery 3 lights with a view to fitting those but good god, they are absolutely gigantic ! After careful thought I decided against it. It is possible but having to remove the headlight mounting box, moving the battery 2 inches back, moving the headlamp rear box back and dropping the bumper 2 inches is a bit beyond my available free time.
Yes I know, I am of course (http://www.seagullparts.co.uk/chat/images/smilies/ubbloco.gif) but who wants a standard landrover ?