Mud-club
Vehicle & Technical => Discovery => Topic started by: TUFFTEE on February 27, 2006, 19:56:39
-
Who makes Offroad rear bumper for disco 1
I have on the front a rebel 4x4 winch bumper and i would like something similar on the Back? Any ideas please.
-
Take your pick mate!
Try First Four (http://www.firstfouroffroad.co.uk/replacement_bumpers.htm), Discoparts (http://www.discoparts.com/asp/d-no.asp?ProductID=56&Process=1&CatID=4&SubCatID=30) and Scorpion Racing (http://www.scorpionracing.co.uk/OFFROAD/htm/cats/prot/inner/moreRbump/DisReBump.htm) to name but three.
-
Take your pick mate!
Try First Four, Discoparts and Scorpion Racing to name but three.
Willdo Many Thanks Mike! :wink:
-
Paddocks do one that appears to be very cheap www.paddockspares.com but it comes with welded on recovery eyes.
I fitted a scorpion one to mine with the recovery eye that swivels. Its very good quality but expensive.
-
Paddocks do one that appears to be very cheap www.paddockspares.com but it comes with welded on recovery eyes.
I fitted a scorpion one to mine with the recovery eye that swivels. Its very good quality but expensive.
Just looking at scorpion site but no prices? how much did you pay? please!
As for the paddocks one could you post a link to the bumper please!"
-
:Di can only speak for the scoerpion one ive got fitted does the job well..there are lots of pics in my galleries as how to fit them under my mods :)
-
Discoparts http://www.discoparts.com
-
That's a serious ramp your motor's on, Colin - whereabouts is it??
-
I've got a Disco Parts bumper on mine with a 'D' ring bolted on for towing and two Jate rings on the chassis.
The Disco Parts one has plate that wraps around the rear chassis crossmember and is bolted using the bolts for the drop plate. The bumper then bolts to this giving good support for snatch recovery. :wink:
(http://myweb.tiscali.co.uk/landrovers/001.jpg)
-
I can't honestly remeber the price of the Scorpion Bumper i think it was roughly around £300 but i'm not sure!
As for the Paddocks bumper, the link is below! :D
Just scroll down a bit and you should see them!
The only difference is that the 300tdi one has the light cut outs and the 200tdi doesn't!
Just put 'bumper' into the search box on the website and it should be half way down the page, the other link didn't work!
http://www.paddockspares.com
Hope this helps you decide!
-
Try this !!!!! http://cgi.ebay.co.uk/GUARDIAN-REAR-TUBULAR-BUMPER-R-R-CLASSIC_W0QQitemZ4615695670QQcategoryZ31348QQssPageNameZWDVWQQrdZ1QQcmdZViewItem £75.00!!!!
-
Mill Services were in the process of getting one ready for production last time we spoke to them, about 6 months ago. The good thing about them is every one is made to order, so if you want any extra bits fitted they will do it. And it's free delivery. We bought a pair of rock sliders from them and they are very good quality.