Mud-club

Chat & Social => The Bar - General Chat => Topic started by: gate78 on March 05, 2006, 16:20:21

Title: aluminium check plate
Post by: gate78 on March 05, 2006, 16:20:21

anybody in the west yorkshire area know of a place i can get some reasonably priced ali check plate? How much should i be paying? only after about 1mm thick.

any pointers welcome!

cheers

Title: aluminium check plate
Post by: bezzabsa on March 05, 2006, 17:36:13

1mm is for looks only, to act as a barrier you need 2-3mm

Title: aluminium check plate
Post by: gate78 on March 05, 2006, 18:14:49

the arches on my sj are knackered. there are big gaps between the skins, i have got rid of the rust, and filled with foam filler, and car filler, however since the panels are shagged i cannot easily fit the flares back on. I was thinking of putting a sheet of ali check plate over the top of the whole panel with pop rivets, and then attach my arches back th that. It is not worth the cash to replace the panels, but surely some check plate would suffice!?

any other solutions appreciated.

Title: aluminium check plate
Post by: karloss on March 05, 2006, 19:04:26

Do you know Huddersfield at all?
If you do and you know where charlie browns is, go down the side of charlie browns into the industrial estate go as far up the yard and as far to the right as possible. You'll find a place called P&D fabrications. Cheap as chips.

Title: aluminium check plate
Post by: marjan on March 05, 2006, 19:23:31

Believe it or not B&Q do a 1mm chequer plate which I used to good effect to plate up the rear bumper on my Sammy. They have it in stock at the Castleford branch.